Hifiverse

Integrated amplifiers — Denon PMA-900HNE

Description, images, technical data and specifications

Denon PMA-900HNE
Image source - (c) Denon

The PMA-900HNE is a stereo integrated network amplifier from Denon with HEOS Built-in music streaming. It combines an Advanced High Current power stage with an MM and MC phono input, digital inputs for TV sound and network playback in one chassis. The front panel is aluminium with a low-noise OLED display, finishes are silver and black, and the US price is USD 1,049.

Key specs that matter

Output power is 50 W + 50 W into 8 ohms (20 Hz - 20 kHz, THD 0.07%) and 85 W + 85 W into 4 ohms (1 kHz, THD 0.7%). THD is 0.01% (-3 dB, 8 ohms, 1 kHz). Phono input sensitivity is 2.5 mV / 47 kohm for MM and 200 µV / 100 ohm for MC, with signal-to-noise ratios of 86 dB and 71 dB. High-level inputs have a sensitivity of 105 mV / 40 kohm (Source Direct off) and a signal-to-noise ratio of 105 dB. Bass and treble controls give ±8 dB at 100 Hz and 10 kHz. Digital inputs are three optical, one coaxial and one USB-A, with PCM up to 192 kHz/24-bit. Power consumption is 200 W, standby 0.2 W. Maximum dimensions are 434 x 376 x 131 mm (W x D x H), and weight is 8.3 kg.

Engineering and use context

Its power amplifier is a discrete Advanced HC single push-pull circuit with Darlington transistors, adapted from Denon's high-end models. Denon states that the AHC transistors have two to three times the current supply capacity of conventional audio power transistors. A high current dynamic power supply is used, and the main transformer has separate coiled wires for the audio and control circuits. Audio circuits sit in the Signal Level Divided Construction (SLDC) chassis, with solid heat sinks and a vibration-resistant layout. Volume is set by a variable gain preamplifier with electrical, encoder-controlled volume that keeps an analogue feel and channel-linear tracking. Source Direct takes the tone controls out of the signal path.

HEOS Built-in connects over Wi-Fi at 2.4 GHz (11b/g/n) and 5 GHz (11a/n/ac) or wired LAN, and adds AirPlay 2 and Bluetooth, including re-broadcast to Bluetooth headphones. Spotify Connect, Tidal, Amazon Music, Deezer, TuneIn and SoundCloud are supported, and the unit is Roon Tested. Network and USB playback covers DSD up to 5.6 MHz, FLAC HD and WAV up to 192/24, ALAC up to 96/24, plus MP3, WMA and AAC, with gapless playback. Amazon Alexa, Google Assistant and Siri via AirPlay 2 can control it. Auto-sensing switches the amplifier on when a TV sends a digital audio signal.

Pairing

Speaker outputs are A and B pairs. Its pre-out is a subwoofer output filtered at 150 Hz, and there is no main-in. The RC-1246 remote has IR learning for TV, and a headphone output is provided.

Alternatives

The PMA-1700NE is a 70 W per channel Denon integrated amplifier with a USB-DAC.

Specifications

  • Model name

    PMA-900HNE

  • Type

    Integrated Amplifier with HEOS Built-in

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    N/A

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    N/A

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components