Hifiverse

Plattenspieler - Audio-Technica AT-LPA2

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio-Technica AT-LPA2
Bildquelle - (c) Audio-Technica

The AT-LPA2 is a fully manual belt-drive turntable from Audio-Technica of Japan, with a transparent acrylic chassis and platter. Its Japanese release date is 23 May 2025, and the US price is USD 2,000. It comes with the AT-OC9XEN dual moving coil cartridge pre-mounted in a dedicated headshell.

Key specs that matter

Drive is by belt from a DC servo motor at 33 1/3 or 45 rpm. Wow and flutter is below 0.12% WRM (33 rpm), and S/N is above 60 dB. The statically balanced straight carbon tonearm has an effective length of 223.6 mm, an overhang of 18.6 mm, a maximum tracking error angle under 2.0 degrees and a tracking force range of 0 - 3.0 g. AT-OC9XEN specifications are 0.35 mV (1 kHz, 5 cm/s), 20 Hz - 30 kHz, 1.8 - 2.2 g tracking force (2.0 g standard), 100 ohms or more recommended load and a mass of about 7.6 g. Power requirement is 100 - 240 V, 50/60 Hz, at 6 W. Dimensions are 420 x 135 x 340 mm (W x H x D) for the turntable, at about 8.4 kg, and 133 x 50 x 228 mm for the control unit, at about 1.1 kg.

Engineering and use context

Audio-Technica uses a low-resonance, high-density acrylic chassis 30 mm thick and an acrylic platter 20 mm thick. According to the company, acrylic has a resonant frequency close to that of a vinyl record. Control circuitry and power supply sit in a separate control unit to isolate the turntable from electrical interference. An optical sensor under the spindle detects the platter rotation, and the control unit drives the DC motor from that signal.

Its tonearm tube is carbon fibre. Height adjusts from -1.5 to +7 mm with the supplied cartridge. Two counterweights of 110 g and 130 g cover cartridge masses of 6.1 - 9.2 g and 9.2 - 13.9 g, headshell excluded. Anti-skating is a newly developed thread-and-weight mechanism with a range equivalent to 1.3 - 3.0 g. The machined aluminium headshell weighs about 11.0 g with leads and gives an overhang adjustment of ±2.5 mm with the AT-OC9XEN. This cartridge has a nude 0.3 x 0.7 mil elliptical stylus, high-purity PCOCC coils and an aluminium pipe cantilever. Machined aluminium insulators with built-in damping rubber support the chassis.

Included are the control unit, a dust cover with hinges, anti-skating weights, a 45 rpm adapter, audio, power, control and earth cables, a hex wrench and gloves. Warranty is two years.

Pairing

A phono stage with an MC input or a step-up transformer is required. The earth cable connects to the phono stage ground terminal.

Alternatives

The Audio-Technica AT-LP7 is another fully manual belt-drive turntable, with a POM platter, a J-shaped tonearm and a switchable built-in phono preamplifier.

Spezifikationen

  • Modellbezeichnung

    AT-LPA2

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    AT-OC9XEN

  • Plattenteller

    acrylic

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link