The AT-LP60XBT-GD is a limited edition of the Audio-Technica AT-LP60XBT in a gold finish. It was made in limited numbers for the United States for Record Store Day 2025, held on 12 April, at an advertised price of USD 199. Mechanism, electronics and cartridge are those of the regular AT-LP60XBT, a belt-drive turntable with fully automatic operation, a built-in phono equalizer and a Bluetooth transmitter.
Key specs that matter
Drive is by belt from a DC servo-controlled motor, at 33-1/3 or 45 RPM. Its platter is aluminium. Wow and flutter is below 0.25% (WTD) at 3 kHz, and signal-to-noise ratio is above 50 dB (DIN-B). A VM type AT3600L cartridge is attached to the headshell, and its replacement stylus is the ATN3600L. Nominal output (1 kHz, 5 cm/sec) is 2.5 mV in PHONO and 150 mV in LINE, with a phono pre-amp gain of 36 dB nominal and RIAA equalisation. Wireless transmission is Bluetooth 5.0 with the A2DP profile and the Qualcomm aptX and SBC codecs, at up to 10 mW EIRP and approx. 10 m in line of sight. An external 12 V, 2 A AC adapter runs on 100 - 240 V, 50/60 Hz, and consumption is 1.5 W. The turntable measures 359.5 x 97.5 x 373.3 mm (W x H x D) and weighs 2.6 kg.
Engineering and use context
Both speeds are chosen with the platter speed button. Pressing START spins the platter and moves the tonearm, while STOP returns it to its original position and stops the platter. For manual selection a tonearm lift button lifts and lowers the arm. A size selector is set to 305 mm or 178 mm records.
On the rear, a pre-amplifier selector switch sets the RCA terminals of the built-in phono equalizer to PHONO or LINE. Each pairing starts with the wireless function button, and the product stays in pairing mode for 30 seconds. When pairing is complete the indicator LED lights blue. Up to eight devices are kept in the pairing memory.
Supplied with the turntable are a dust cover, a felt mat, the platter with its drive belt, a 45 RPM adapter, an RCA audio cable of approx. 1.2 m and an AC adapter of approx. 1.5 m. Replacement belts are the AT-LP60X exclusive part.
Pairing
Wireless playback requires a Bluetooth receiver with A2DP, and aptX is used when the receiver supports it. PHONO position requires a phono input with a ground terminal. LINE position connects to an AUX or line input of an amplifier, receiver, active speakers or a sound card.
Alternatives
The AT-LP60X uses the same automatic belt-drive platform without a Bluetooth module.