The Artist V2 is a moving magnet cartridge in a low-resonance ebony housing from Clearaudio of Erlangen, Germany. It belongs to the MM V2 range, which runs from the concept V2 through the Performer V2, Artist V2 and Maestro V2 to the Charisma V2 at the top. Within that range it pairs a hand-polished ebony body with an aluminium cantilever and an elliptical diamond.
Key specs that matter
Output voltage is approx. 3.6 mV (1 kHz, 5 cm/s), and frequency response is 20 Hz - 20 kHz. Channel separation is 24 dB and channel balance 0.8 dB, both at 1 kHz. Tracking ability is 80 µm at a recommended tracking force of 2.2 g ±0.3 g. Coil impedance is 0.66 kΩ (1 kHz) and coil inductance 400 mH. Clearaudio specifies a load resistance of 47 kΩ and a capacitive load of 100 pF. The stylus carrier is aluminium with an elliptical diamond cut, and stylus compliance is 15 µ/mN. Mass of the complete system is 8.4 g (±0.4 g). Manufacturer's warranty is 2 years, provided the completed warranty card is returned to Clearaudio within 14 days of purchase.
Engineering and use context
Clearaudio's MM Technology V2 rests on four measures - ebony as a low-resonance housing, the lowest possible moving mass, optimised HD grinding of the stylus and highly effective damping inside the cartridge. Apart from the concept V2, which is made of aluminium, every body in the range is hand-polished ebony.
Each cartridge is measured several times in four planes, analysed and then hand-selected. According to Clearaudio, this gives homogeneous stereo channels and minimal phase and transient distortion. Against the Performer V2, which uses the same aluminium and elliptical stylus assembly in an ebony body, the Artist V2 has 0.3 mV more output, 4 dB more channel separation and a channel balance tighter than the 1.5 dB of the Performer.
Pairing
A phono stage with an MM input is required. Clearaudio states that the MM V2 models work on all common tonearms.
Alternatives
The Performer V2 is the Clearaudio MM V2 model one step below the Artist V2.