Hifiverse

Tonabnehmer - Clearaudio JUBILEE MC

Beschreibung, Bilder, technische Daten und Spezifikationen

Clearaudio JUBILEE MC
Bildquelle - (c) Clearaudio

The Jubilee MC is a low-output moving coil cartridge from Clearaudio of Erlangen, Germany, and the first moving coil model from the company with a body made of Panzerholz. Clearaudio created it to mark 40 years of development and manufacturing in Erlangen. Its outline is reminiscent of the V2.1 cartridge series.

Key specs that matter

Output voltage is 0.5 mV (5 cm/s) and cartridge impedance is 50 ohms. Frequency response is 20 Hz - 20 kHz. Channel separation is better than 32 dB and channel balance is under 0.5 dB. A boron cantilever carries a Clearaudio Prime Line diamond. Stylus compliance is 15 µ/mN, tracking ability 80 µm and recommended tracking force 2.8 g (±0.2 g). The coils are 24 carat gold wire in an absolutely pivot-symmetrical arrangement. Mass of the complete system is 7.5 g. A two-year warranty applies when the completed warranty card reaches Clearaudio within 14 days of purchase.

Engineering and use context

Panzerholz is a specially laminated wood, and Clearaudio selected it for this body for its low resonance and minimal weight. Every housing is refined with a special lacquering and polishing technique. That surface treatment follows the craft of the violin makers in neighbouring Bubenreuth, and the company presents the Jubilee MC as a piece of regional artisan work.

Electrically the Jubilee MC matches the ebony-bodied Stradivari V2.1, with the same 0.5 mV output, 50-ohm impedance and Prime Line diamond on boron, while the Panzerholz body adds 0.5 g and the channel separation figure is higher. Clearaudio also uses Panzerholz for the MM Jubilee, a moving magnet model of the same anniversary family. Clearaudio supplies a dedicated instruction manual for the Jubilee MC.

Pairing

A phono stage with an MC input or a step-up transformer for low-impedance coils is required.

Alternatives

The Clearaudio Stradivari V2.1 is a 7.0 g moving coil model with an ebony body, a metal inlay and the same 0.5 mV output.

Spezifikationen

  • Modellbezeichnung

    JUBILEE MC

  • Typ

    MC

  • Nadel

    Clearaudio Prime Line

  • Gehäuse

    Bullet proof wood

  • Nadelträger

    Boron

  • Spulen

    24 carat gold

  • Ausgangsspannung (mV@5cm/sec)

    0.5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Innenwiderstand (Ohm)

    50

  • Kanaltrennung (dB / 1,000 Hz)

    > 32

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    15µ/mN

  • Empfohlene Abschlussimpedanz (Ohm)

    N/A

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    7.5

  • Offizieller Link