Hifiverse

Tonabnehmer - Clearaudio CONCERTO V2

Beschreibung, Bilder, technische Daten und Spezifikationen

Clearaudio CONCERTO V2
Bildquelle - (c) Clearaudio

The Concerto V2 is a moving coil cartridge from Clearaudio in Erlangen, Germany, and its current version is the Concerto V2.1. Clearaudio counts it as a member of its master class of MC cartridges, and the design of the body is meant to identify it as one. The body is satiné wood with a metal inlay and a satin finish, and Clearaudio names the low total weight as a main quality of the latest Concerto generation.

Key specs that matter

Output voltage is 0.5 mV (5 cm/s) and cartridge impedance is 50 ohms. Frequency response is 20 Hz - 20 kHz. Channel separation is 25 - 30 dB, and channel balance is under 0.5 dB. Its cantilever is boron with a Clearaudio Prime Line diamond cut. Tracking ability is 80 µm, stylus compliance is 15 µ/mN and recommended tracking force is 2.8 g (±0.2 g). Total system mass is 7.0 g. A two-year manufacturer's warranty applies if the completed warranty card is returned within 14 days of purchase.

Engineering and use context

Inside the wooden body sit coils of 24 carat gold wire and the patented Clearaudio magnetic circuit, which according to the company is found only in its own cartridges. The coils are arranged in an absolutely pivot-symmetrical configuration. Clearaudio names the boron cantilever and the stylus diamond as the key parts of the Concerto, and it describes the wooden body as resonance-optimised.

Pairing

A phono stage with an MC input or a step-up transformer is required. An MC stage with load settings for low-impedance coils matches it. A tonearm able to reach the recommended tracking force with this cartridge mass is required.

Alternatives

The Clearaudio Stradivari V2.1 is a moving coil cartridge of the same output and weight, with a body of ebony stored for months, a metal inlay and a precisely ground twelve-fingered platform.

Spezifikationen

  • Modellbezeichnung

    CONCERTO V2

  • Typ

    MC

  • Nadel

    Clearaudio Prime Line

  • Gehäuse

    N/A

  • Nadelträger

    Boron

  • Spulen

    Absolutely symmetrical design

  • Ausgangsspannung (mV@5cm/sec)

    0.5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Innenwiderstand (Ohm)

    50

  • Kanaltrennung (dB / 1,000 Hz)

    25 - 30

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    15μ/mN

  • Empfohlene Abschlussimpedanz (Ohm)

    N/A

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    7.0

  • Offizieller Link