The Qutest is a compact standalone DAC from Chord Electronics and the latest evolution of the brand's most affordable standalone converter, with no built-in headphone amplifier, unlike the Mojo 2 and Hugo 2. It belongs to the Hugo range. Chord launched it at CES in Las Vegas on 9 January 2018 at GBP 1,195 as the replacement for the 2Qute. Rob Watts is the digital designer, John Franks the mechanical designer, and the country of manufacture is England.
Key specs that matter
Conversion runs on a Chord custom-coded Xilinx Artix 7 (XC7A15T) FPGA with a tap length of 49,152, a 10-element pulse array and a class A output stage. The galvanically isolated USB Type B input accepts 44.1 - 768 kHz at 16 - 32 bit, and DSD is played natively from DSD64 to DSD512. Two BNC coaxial inputs accept 44.1 - 384 kHz at 16 - 32 bit each, or up to 768 kHz in dual data mode with both used together. The optical input accepts 44.1 - 96 kHz at 16 - 24 bit. Output is one stereo pair of RCA. Chord specifies frequency response of 20 Hz - 20 kHz (±0.2 dB), THD below 0.0001% (1 kHz, 3 V RMS, 300 ohms), THD and noise of 117 dB at 1 kHz into 300 ohms A-weighted (reference 2.5 V), noise of 2.6 µV A-weighted with no measurable noise floor modulation, and channel separation of 138 dB (1 kHz, 300 ohms). Dimensions are 45 x 160 x 88 mm (H x W x D), and weight is 770 g.
Engineering and use context
Output voltage is fixed but selectable between 3 V (blue), 2 V (green) and 1 V (red) by pressing Filter and Input together at start-up. Hugo 2's four user-selectable frequency-shaping filters are carried over, and filter and input are chosen with two fascia-mounted spheres. Its chassis is precision-machined from a solid aircraft-grade aluminium billet and has greater mass than the predecessor. Inside, the PCB sits in a shallow cavity in the aluminium chassis for protection within the casework and isolation from external vibration. Buttons are polycarbonate, a glass viewing portal is set into the top, and Jett Black is the only finish.
Power comes from a 5 V 2 A micro USB socket, and a 5 V 2 A switching micro USB power supply is included together with a USB A to USB B cable and a drawstring bag. Operation is driverless under macOS and Linux, while Windows requires a driver. The Qutest is Roon tested.
Pairing
The RCA outputs connect to integrated amplifiers, preamplifiers and headphone amplifiers. With no volume control, a line input with its own level control is required. The dual data BNC inputs accept the 768 kHz output of the Chord Hugo M Scaler.
Alternatives
The Chord DAVE is the larger standalone DAC in the Chord range.