DAVE is the flagship DAC of Chord Electronics and belongs to the company's Choral range. The name stands for Digital to Analogue Veritas in Extremis. One chassis combines a reference-level digital to analogue converter, a headphone amplifier and a digital preamplifier. It is handmade in Britain in black and silver finishes.
Key specs that matter
Frequency response is 20 Hz - 20 kHz (±0.1 dB, HF filter off). THD+N is -127.5 dB (A-weighted), dynamic range is 127.5 dB (A-weighted) and channel separation is above 125 dB at 1 kHz. Output impedance is 0.055 ohms, short-circuit protected. Headphone output is 6.8 V RMS at 1% THD (154 mW into 300 ohms, 1.4 W into 33 ohms), and headphones up to 800 ohms are supported. Sample rates run from 44.1 kHz to 768 kHz at 16 - 32 bit, plus DSD64 to DSD512 native and DoP, depending on the input. Digital inputs are four 75-ohm S/PDIF BNC coaxial (44.1 - 384 kHz), one AES XLR and two TOSLINK optical (44.1 - 96 kHz each) and one USB Type B (44.1 - 768 kHz, PCM and DSD). Analogue outputs are one unbalanced RCA pair, one balanced XLR pair and a 6.35 mm TRS headphone jack. Dimensions including connectors are 78 x 335 x 152 mm (H x W x D), and weight is 5 kg.
Engineering and use context
At the centre of DAVE sits a Spartan 6 Field Programmable Gate Array (FPGA). Chord states that it has 1,000 times the processing power of a traditional mass-produced chip DAC and is loaded with over a million lines of code. Its interpolation filter has a tap length of 164,000. Volume is set by a lossless digital volume control, and the line outputs can go straight to a power amplifier in the standalone preamp function. A large LC display inside the porthole window shows input, sample frequency, volume and set-up options. On the fascia there are a rotary encoder with a large stainless steel controller and ball buttons, and an IR remote control is supplied. Configurable crossfeed is available for headphone use, and the USB input is galvanically isolated. The solid aluminium chassis has expandable DXO inputs. Operating voltage is 90 - 250 V AC, 50/60 Hz with auto switching, and power consumption is 40 W at full power and 10 W in standby.
Pairing
Power amplifiers or active speakers with XLR or RCA inputs connect directly. The matching preamplifier is the ULTIMA PRE 2. DAVE is Roon tested and works with Windows, macOS, Linux, Android and iOS hosts, and a Type-A to Type-B USB cable and an optical cable are included.
Alternatives
The Qutest is Chord's compact standalone DAC, without a headphone output.