Hugo 2 is a transportable DAC and headphone amplifier from Chord Electronics, designed by Rob Watts. Conversion runs on a custom-coded FPGA instead of an off-the-shelf DAC chip, and the same unit works on battery with a phone or laptop, as a desktop headphone amplifier or as a line-level DAC in a hi-fi system.
Key specs that matter
The FPGA is a Chord custom-coded Xilinx Artix 7 (XC7A15T). Inputs are USB (Micro USB, 44.1 - 768 kHz, 16 - 32-bit), coaxial on a 3.5 mm jack (44.1 - 384 kHz, or up to 768 kHz in dual data mode), optical (44.1 - 96 kHz, 16 - 24-bit) and Bluetooth aptX (44.1 - 48 kHz, 16-bit). DSD is supported natively from DSD64 to DSD512. Outputs are one 6.35 mm and one 3.5 mm headphone socket plus stereo RCA, at 3 V in line-level mode. Output power at 1 kHz and 1% THD is 94 mW into 300 ohms, 740 mW into 32 ohms and 1050 mW into 8 ohms, with loads up to 800 ohms supported. Output impedance is 0.025 ohms. Frequency response is 20 Hz - 20 kHz (±0.2 dB), THD is below 0.0001% (1 kHz, 3 V RMS, 300 ohms), SNR is 126 dB (A-weighted), noise floor is 2.6 µV (A-weighted) and channel separation is 135 dB (1 kHz, 300 ohms). Dimensions are 21 x 100 x 130 mm (H x W x D), and weight is 365 g.
Engineering and use context
Its reconstruction filter is a WTA (Watts Transient Aligned) filter with 49,152 taps, and the converter is a 10-element pulse array design. Four digital filters are selectable, two of them with HF roll-off. Crossfeed has an off setting and three levels, light, medium and heavy. The output stage operates in class A.
Four spherical control buttons illuminate with colour-coded information. Volume is digital in 1 dB steps, and line-level mode is engaged by pressing Source and Crossfeed together. Power comes from two 2600 mAh Li-ion batteries (3.7 V, 9.6 Wh each), with about 6 hours of average playtime and charging over Micro USB in about 6 hours at 1.8 A or 8 hours at 1 A. Its casing is precision-machined aluminium in natural silver or satin black, with polycarbonate buttons, an acrylic signal window and a glass viewing portal. An IR remote control is included.
Pairing
IEMs and headphones connect to the 3.5 mm or 6.35 mm socket. In line-level mode the RCA outputs connect to an integrated amplifier or preamplifier. The matching streaming module is the Chord 2go.
Alternatives
The Mojo 2 is the smaller portable DAC and headphone amplifier from Chord.