The Mojo 2 is a portable DAC and headphone amplifier from Chord Electronics, handmade in the UK in a CNC-milled aircraft-grade aluminium chassis. It measures 83 x 62 x 22.9 mm and weighs 185 g. Conversion runs on a custom-coded FPGA processor, and the unit is wireless-ready once the Chord Poly streamer/server is added.
Key specs that matter
Digital inputs are coaxial, dual-data coaxial, optical, Micro-USB and USB-C. Sample rates reach 768 kHz on USB and coaxial and 96 kHz on optical, with DSD up to DSD256 via DoP. One 3.5 mm and one 4.4 mm headphone output are provided, with an output impedance of 0.06 ohms. Output power is 90 mW into 300 ohms (5.2 V RMS) and 600 mW into 30 ohms (4.2 V RMS) at 1% THD. THD+N is 0.0003% (2.5 V, 300 ohms). Dynamic range is 125 dB and signal-to-noise ratio 123 dB, both A-weighted, and noise is 2.7 µV (A-weighted) with no measurable noise floor modulation. Stereo separation is 118 dB (1 kHz, 300 ohms, 2.5 V). Frequency response is 7 Hz - 20 kHz (±3 dB).
Engineering and use context
Chord specifies an improved FPGA with more resolution, power and efficiency, and its WTA filtering now runs on 40 DSP cores.
Tone adjustment comes from the UHD DSP, an advanced EQ that Chord describes as a lossless digital tone control. The Mojo 2 is operated with control spheres. A new fourth sphere brings mute, crossfeed, button lock, switchable USB-C charging and tone control adjustment.
Battery management is revised, with a 75% reduction in power loss, a 9% capacity gain and faster charging rates. Its USB-C socket is a high-speed input and also the charging input. A Micro USB to USB Type-A cable is included.
Pairing
A source with a coaxial, optical or USB digital output is required. Headphones with a 3.5 mm or 4.4 mm plug connect directly, up to 800 ohms. The matching wireless streamer is the Chord Poly.
Alternatives
The Hugo 2 is Chord's larger portable DAC and headphone amplifier.