The ZX-12 Sub is a 300 mm active subwoofer from Mission, built as the bass unit for the ZX Series. Mission lists it both for ZX Series home-theatre systems and for bass extension in 2-channel applications. It is based on the same system as the QX-12 SUB and differs in its high-gloss paint finish, which matches the ZX loudspeakers. The 2022 Mission catalogue lists the finishes as hi-gloss black and hi-gloss white.
Key specs that matter
Drive unit - 1 x 300 mm long-throw cone. Amplifier power output is 300 W, with 450 W peak. Frequency response is 35 - 120 Hz (±3 dB), and the crossover range is 30 - 150 Hz. Line input sensitivity is 200 mV for maximum output. Inputs are stereo line in (2 x RCA phono) and mono LFE line in (RCA phono), at 10 kohms and 5 kohms respectively. Signal-to-noise ratio is 85 dB or better, and average maximum output is 118 dB at 1 m. Dimensions are 400 mm wide, 420 mm high plus 58 mm of feet and 450 mm deep plus 15 mm. Net weight is 23 kg.
Engineering and use context
Mission's manual describes the ZX-12 Sub as an Active Dynamic-Drive IB subwoofer system in a ported box. Its 300 mm paper cone was specially engineered for increased self-damping and higher structural rigidity of the cone itself. Copper-lined vents are used to reduce magnetic distortion and to improve heat dissipation.
A custom-designed balanced-drive class D power amplifier is built in and optimised for low frequencies. The low-pass filter is continuously adjustable, and the rear panel also carries a level control and phase inversion. Low-level inputs, output connections and a dedicated LFE input are provided. According to Mission, the auto power sensor detects incoming signals of very low level and switches the subwoofer on automatically. An IEC power cord is supplied.
Pairing
Matching loudspeakers are the ZX Series - the ZX-1 and ZX-2 standmount models, the ZX-3, ZX-4 and ZX-5 floorstanding speakers, the ZX-C1 and ZX-C2 centre speakers and the ZX-S surround speaker. Its LFE input takes the subwoofer output of an AV receiver or processor. A stereo amplifier connects through its preamplifier outputs to the stereo line inputs.
Alternatives
The Mission QX-12SUB MKII uses the same 300 mm long-throw cone and 300 W amplifier in a walnut pearl, lux white or lux black cabinet.