The MS-450 is the largest of four active subwoofers in the MS range from British loudspeaker maker Mission, alongside the MS-150, MS-200 and MS-400. Mission presents the MS series as the latest in a long line of its active subwoofers. The MS-450 is designed and engineered in the United Kingdom and made in China.
Key specs that matter
Mission describes the MS-450 as an active Dynamic-Drive IB subwoofer system with one 380 mm long-throw cone and a 400 W amplifier. Frequency response is 25 - 150 Hz (±3 dB), and the variable low-pass crossover covers 40 - 150 Hz. Average maximum output is 124 dB at 1 m. Line input sensitivity is 200 mV for maximum output, input impedance is 10 kohms for the stereo line input and 5 kohms for the LFE input, and signal-to-noise ratio is 85 dB or better. Dimensions are 460 x (530 + 58) x 560 mm (W x H x D, height with feet), with a net weight of 32.5 kg and a gross weight of 36.5 kg.
Engineering and use context
A specially developed long-throw bass driver is driven by an ultra-fast balance-drive class D power amplifier. Inside the enclosure, bracing sits at key points chosen through CAD analysis and experimentation. Its rear panel carries the auto sense switch, a phase switch with 0 and 180 degree settings, the crossover frequency and volume controls, a mains power indicator, the line and LFE inputs, the fuse holder, an IEC mains socket and the mains switch. With auto sense off, the subwoofer stays permanently on, while in auto mode it switches on and off with the signal.
Connections are two RCA sockets for the stereo line input and one RCA socket for the mono LFE input. Mission classifies it as Class II (double insulated), so no safety earth connection is required. The panel rating is AC 220-240 V, 50/60 Hz and 650 W, protected by a T3.15AL 250 V fuse. Mission advises two people for lifting and warns against dragging the cabinet. Listed finishes are black wood vinyl, walnut, rosewood and white sandex.
Pairing
An AV processor with an LFE output connects through a single screened RCA lead. A stereo amplifier with a spare preamplifier output or a stereo subwoofer output connects through a stereo RCA cable. With a separable pre and power amplifier, two RCA Y adaptors on the pre out and main in sockets are required.
Alternatives
The Mission MS-400 is the next smaller model in the MS subwoofer range.