The MS-400 Sub is an active subwoofer from Mission's MS Subwoofer range, a line of models for home cinema and stereo systems. Within the range it sits above the MS-200 Sub and below the MS-450 Sub. Mission describes the format as an Active Dynamic-Drive IB subwoofer system.
Key specs that matter
The drive unit is a single 250 mm (10-inch) long-throw cone driver. Frequency response is 35 - 120 Hz (±3 dB). Amplifier power output is 215 W, and average maximum output is 115 dB at 1 m. Line input sensitivity is 200 mV for maximum output, and signal-to-noise ratio is 85 dB or better. The crossover range is 30 - 120 Hz. Inputs are a stereo line input on two RCA phono sockets and a mono LFE line input on one RCA socket, with input impedances of 10 kohms and 5 kohms. Dimensions are 402 x 352 x 375 mm (W x H x D), net weight is 14.6 kg and gross weight is 17 kg.
Engineering and use context
Each model in the MS range combines a specially developed long-throw bass driver with a balance-drive Class D power amplifier. Mission specifies a down-firing or forward-firing bass unit, depending on the model, to improve room coupling at low frequencies. Controls are an adjustable crossover frequency, a level control and a phase switch for phase inversion. Mission provides the variable crossover frequency control for integration with the other speakers in the system, in home cinema as well as in stereo. Its standby circuit is listed as Auto on-off with Auto Sense.
Pairing
An AV receiver connects from its subwoofer output to the LFE input. A stereo amplifier with a pre-out or sub out uses the stereo line input. Speaker-level inputs are not provided on this model.
Alternatives
The Mission MS-450 Sub is the larger model of the MS range, with a 380 mm (15-inch) driver and a 450 W amplifier.