Hifiverse

Subwoofer - Mission MS-200 Sub

Beschreibung, Bilder, technische Daten und Spezifikationen

Mission MS-200 Sub
Bildquelle - (c) Mission

The MS-200 Sub is an active subwoofer in the MS subwoofer range from Mission, the British loudspeaker brand of the International Audio Group. Mission describes it as an Active Dynamic-Drive IB subwoofer system and positions the MS range for both home cinema and stereo systems. It sits above the MS-150, which uses a 200 mm driver and a 70 W amplifier, and shares its user manual with that model.

Key specs that matter

Drive unit - 1 x 250 mm long-throw cone. Amplifier power output is 120 W. Frequency response is 35 - 150 Hz (±3 dB), and the crossover range is 40 - 150 Hz. Line input sensitivity is 100 mV for maximum output. Inputs are stereo line in (2 x RCA phono) and mono LFE line in (RCA phono), with an input impedance of 10 kohms on the line inputs and 5 kohms on LFE. Signal-to-noise ratio is 85 dB or better, and average maximum output is 110 dB at 1 m. Dimensions are 333 x (363 + 32) x 366 mm (W x H x D, height plus feet). Net weight is 13 kg, 16.5 kg packed.

Engineering and use context

Its long-throw bass driver was specially developed for the MS range and is driven by a balance-drive class D power amplifier. According to Mission, each model in the range has either a down-firing or a forward-firing bass unit to improve room coupling at low frequencies. The cabinet has bass ports, according to the manual.

On the rear panel are a variable crossover frequency control, a level control and a phase switch with 0° and 180° positions. An Auto Sense switch selects between auto on-off operation and a normal mode in which the subwoofer is permanently on. Mains connection is through an IEC socket with a supplied power lead, and the MS-200 is a Class II double-insulated design that must not be connected to earth.

Pairing

The LFE input takes the line-level subwoofer output of an AV processor or receiver through a single RCA lead. With a stereo amplifier, the line inputs connect to a spare preamplifier output. With separate pre and power amplifiers, two RCA Y adaptors split the pre-out signal between the power amplifier and the subwoofer line inputs.

Alternatives

The Mission MS-400 Sub uses the same 250 mm long-throw driver size with a 215 W amplifier, a 35 - 120 Hz (±3 dB) response and a 14.6 kg cabinet.

Spezifikationen

  • Modellbezeichnung

    MS-200 Sub

  • Untere Grenzfrequenz +/- 3dB (Hz)

    35

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    120

  • Größe (sm)

    33.3 × 38.5 × 36.3

  • Gewicht (kg)

    13

  • Offizieller Link