Hifiverse

Subwoofer - Mission MS-150 Sub

Beschreibung, Bilder, technische Daten und Spezifikationen

Mission MS-150 Sub
Bildquelle - (c) Mission

The MS-150 is the smallest active subwoofer in the MS range from British brand Mission, a family that also includes the MS-200, MS-400 and MS-450 and is intended to extend bass in home cinema and stereo systems. Mission describes it as an Active Dynamic-Drive IB subwoofer system with a single long-throw bass driver and a built-in amplifier. It is made in China in a black finish, and in Hong Kong it was priced at HKD 2,580.

Key specs that matter

Its drive unit is a 200 mm long-throw cone, and amplifier power output is 70 W. Frequency response is 40 - 120 Hz (±3 dB), and the crossover range is 40 - 150 Hz. Average maximum output is 110 dB at 1 m. Line input sensitivity is 100 mV for maximum output. Input impedance is 10 kohms for the stereo line input and 5 kohms for the LFE input. Signal-to-noise ratio is 75 dB or better. Dimensions are 268 x (298 + 32) x 297 mm (W x H x D), net weight is 7.5 kg, and gross weight is 10 kg.

Engineering and use context

According to Mission, each model in the MS range combines a specially developed long-throw bass driver with an ultra-fast balance-drive Class D power amplifier. Within the range, each subwoofer has either a down-firing or a forward-firing bass unit, which Mission uses to improve room coupling at low frequencies and to disperse the bass evenly through the listening area.

Controls on the MS-150 are a variable crossover frequency control, a level control and a phase switch with phase inversion. An Auto Sense circuit provides automatic on and off switching. Connections are line level only, with a stereo line input on two RCA phono sockets and a mono LFE line input on a single RCA phono socket.

Pairing

A preamplifier output, a subwoofer output or the LFE output of an AV receiver or processor is required. The stereo line input accepts left and right signals from the pre-outs of a stereo amplifier, and the LFE input connects to the subwoofer output of a home cinema receiver.

Alternatives

The Mission MS-200 is the next model up in the MS range, with a 250 mm long-throw driver, a 120 W amplifier, a response of 35 - 150 Hz (±3 dB) and a net weight of 13 kg.

Spezifikationen

  • Modellbezeichnung

    MS-150 Sub

  • Untere Grenzfrequenz +/- 3dB (Hz)

    40

  • Obere Grenzfrequenz +/- 3dB (Hz)

    120

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    70

  • Größe (sm)

    26.8 × 33.0 × 29.7

  • Gewicht (kg)

    7.5

  • Offizieller Link