The LX-10 Sub is an active subwoofer from Mission's LX Series, the range of stand-mount, floorstanding and centre speakers it was designed to extend. In Mission's subwoofer line it sits next to the larger QX-12 Sub. It has since been followed by the LX-10SUB MKII, which Mission lists with the same driver, amplifier power and dimensions, in Walnut Pearl, Lux White and Lux Black.
Key specs that matter
The drive unit is a single 250 mm (10-inch) PP cone long-throw driver. Frequency response is 40 - 120 Hz (±3 dB). Amplifier power output is 200 W, and peak power output is 350 W. Average maximum output is 118 dB at 1 m. Line input sensitivity is 200 mV for maximum output, and signal-to-noise ratio is 85 dB. The crossover range is 30 - 150 Hz. Height is 412 mm plus 35 mm for the feet, width 312 mm and depth 392 mm plus 15 mm, and net weight is 16 kg.
Engineering and use context
Both inputs are on RCA phono sockets - a stereo line input with two sockets and, next to it, a separate mono LFE line input. Phase inversion and an auto on-off function are part of the specification.
Mission states that the LX cabinets were developed with CAD analysis, experimentation and listening tests, and that each cabinet is braced at key points to remove unwanted resonances and vibrations. In the current Mission catalogue the LX-10SUB MKII belongs to the Active Dynamic Drive subwoofer series, alongside the QX-12SUB MKII, ZX-12SUB and MS-450SUB.
Pairing
An AV receiver connects from its subwoofer output to the LFE input. A stereo amplifier with a pre-out or a sub out uses the stereo line input. Matching speakers are the LX Series stand-mount, floorstanding and centre models for 2.1 and 5.1 systems.
Alternatives
The Mission MS-400 Sub is a 10-inch subwoofer from the MS range with a 215 W Class D amplifier.