Hifiverse

Subwoofer - Genelec 7050C

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 7050C
Bildquelle - (c) Genelec

The 7050C is a very compact active subwoofer in Genelec's 7000 series and the newest version of the 7050. It is designed to extend the bass reproduction of Genelec active loudspeakers in stereo or surround applications, particularly the 8010, 8020, 8030 and M030. Genelec quotes a maximum SPL 3 dB higher than that of its predecessor.

Key specs that matter

A single 205 mm magnetically shielded low-frequency driver is driven by a 130 W amplifier. Lower cut-off frequency is 24 Hz (-6 dB), and the upper cut-off is 85 Hz for the main channels and 120 Hz for the LFE channel. Maximum short-term sine wave output is 103 dB SPL (averaged from 30 to 85 Hz, in half space at 1 m). At 90 dB SPL, harmonic distortion is 4% or less for the 2nd and 1% or less for the 3rd harmonic. Self-generated noise is 5 dB or less (A-weighted). Amplifier system THD at nominal output is 0.05% or less. Inputs are five balanced XLR female connectors at 10 kOhm and an LFE IN, and outputs are five XLR male connectors. Power consumption is 0.5 W or less in ISS standby, 11 W idle and 150 W at full output, from a universal 100-240 V supply. Dimensions are 410 x 350 x 319 mm (H x W x D), and weight is 17.3 kg.

Engineering and use context

Its Laminar Spiral Enclosure (LSE) is made from a spiral-shaped strip of steel that also forms the bass reflex port, with linear air flow at the highest SPL outputs.

Inside the bass management unit, the active crossover splits inputs 1-5 at 85 Hz, with frequencies below going to the subwoofer and those above to the main speakers at 0 dB passband gain. The LFE input has a separate 120 Hz low-pass and a selectable +10 dB boost. Genelec adds a subsonic filter of 18 dB per octave below 24 Hz and midband rejection of 50 dB or more above 400 Hz. Input sensitivity is adjustable from +12 to -6 dBu. Two Bass Roll-Off switches give 0 to -12 dB at 26 Hz in 4 dB steps, and two phase switches give 0 to -270 degrees in 90-degree steps.

A 6.3 mm Bypass input accepts a TRS or TS plug for a contact switch. With bypass active, the subwoofer reproduces only the LFE signal, and the outputs to the monitors are exact copies of the inputs. Intelligent Signal Sensing (ISS) is enabled with its own switch, and ISS SENSITIVITY LOW lowers its triggering sensitivity. Driver overload protection, power-on signal muting, thermal overload and short circuit protection are included in the amplifier.

Pairing

A multichannel line-level source with balanced XLR outputs is required. The LFE IN is for the .1 output of a 5.1-channel discrete surround source. Its five outputs connect to the main loudspeakers.

Alternatives

The 7040A is the smaller Genelec 7000 series subwoofer, with a 165 mm driver, a 50 W amplifier and two XLR inputs.

Spezifikationen

  • Modellbezeichnung

    7050C

  • Untere Grenzfrequenz +/- 3dB (Hz)

    24

  • Obere Grenzfrequenz +/- 3dB (Hz)

    85

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    130

  • Größe (sm)

    41.0 x 35.0 x 31.9

  • Gewicht (kg)

    17.3

  • Offizieller Link

Weitere Komponenten