Hifiverse

Subwoofer - Genelec 7360A

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 7360A
Bildquelle - (c) Genelec

The 7360A SAM Studio Subwoofer is an active subwoofer from Genelec of Finland, equipped for both stereo and multichannel monitoring. Genelec lists it for small to mid-sized studios, post and broadcast facilities and OB vehicles. In the SAM subwoofer range it sits between the 7350A and the larger 7370A. The package contains the subwoofer, a 1.8 m mains cable, a 5 m RJ45 cable and the operating manual.

Key specs that matter

A magnetically shielded 250 mm cone driver is powered by a 300 W Class D bass amplifier. Frequency response is 19 Hz - 100 Hz (±3 dB), with -6 dB cut-off points at 19 Hz and 150 Hz. Short-term maximum SPL is 109 dB or more (sine wave averaged from 30 to 85 Hz, half space, 1 m), and peak SPL is 114 dB or more with random pink noise. Second harmonic distortion is 3% or less from 30 to 85 Hz. Self-generated noise is 5 dB SPL or less (A-weighted, 1 m on axis). Connections are seven analogue XLR inputs (balanced, 10 kohms) and seven analogue XLR outputs for the 7.1 main channels, an analogue LFE input and output, an AES/EBU XLR input and thru output (110 ohms) and two RJ45 GLM network connectors. Mains supply is 100-240 V AC, and consumption is 1 W or less in ISS mode, 15 W or less at idle and 300 W at full output. It measures 527 x 462 x 363 mm (H x W x D) and weighs 27 kg.

Engineering and use context

The cabinet is a Laminar Spiral Enclosure (LSE) bass reflex design. Its spiral shape forms both the rigid enclosure exterior and the integral port, giving laminar flow with minimal turbulence noise and room for a very long reflex tube in a small space. Genelec quotes measured second and third harmonic distortion typically better than 30 dB below the fundamental for its LSE subwoofers.

Onboard bass management filters low frequency information from the main channels and routes it to the subwoofer, and the dedicated LFE channel is added to it. LFE channel output level is selectable at 0 or +10 dB relative to the main channels, and the subwoofer can be bypassed. Genelec digital active crossovers also include driver protection, delay and equalisation. ISS circuitry sets a low-power sleep state when no input signal is present. Level, delay and crossover phase are set with the free GLM software, which needs a 9320A SAM Reference Controller or a GLM Calibration Kit, both sold separately.

Pairing

The matching monitors are Genelec SAM models on the same GLM network. Main monitors connect to the analogue XLR outputs after bass management, and digital sources use the AES/EBU input.

Alternatives

The 7370A is Genelec's larger SAM subwoofer, with a 305 mm driver and a 400 W Class D amplifier.

Spezifikationen

  • Modellbezeichnung

    7360A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten