The 7382A SAM Studio Subwoofer is the most powerful subwoofer Genelec has made to date, with a response down to 15 Hz and maximum SPL above 130 dB. Genelec introduced it on 7 August 2018 together with the S360 monitor. It is designed for recording studios, film mixing facilities, mastering suites, post-production houses, EDM playback and home theatres, and it also brings GLM features to the lower octaves of systems with main speakers from another vendor.
Key specs that matter
Three 381 mm cone drivers sit in a reflex port enclosure. Amplification is a separate RAM-SW unit rated at 2500 W short term in Class D, with amplifier system THD below 0.01%. Cut-off points are 15 Hz and 100 Hz (-6 dB), or 120 Hz for the LFE channel. Short-term maximum SPL is ≥129 dB (sine wave averaged 30 - 85 Hz, half space, 1 m), and peak SPL is ≥133 dB with random pink noise. At 105 dB SPL, second harmonic distortion is ≤1% and third ≤1.5% (30 - 85 Hz). Self-generated noise is below 5 dBA. Inputs are two balanced XLR analogue channels (10 kOhm, maximum +24 dBu), an XLR LFE input and an AES/EBU input (16 - 24 bit, 32 - 192 kHz) with thru output. Mains supply is 100-240 V AC, and consumption is under 1 W in power save mode, 22 W at idle and 1500 W at full output peak. Its enclosure measures 625 x 1400 x 558 mm (H x W x D) and weighs 145 kg, and the 3U amplifier weighs 11.3 kg.
Engineering and use context
A Speakon connector on the RAM-SW links it to the enclosure, and a 10 m Speakon cable is supplied. Each amplifier is individually calibrated for the enclosure with the same serial number, so pairs must not be mixed. In the distributed bass management of the 7382A, monitors and subwoofer receive a full-bandwidth signal, and GLM sets the lowpass and highpass filters in synchrony. Its input low-pass is selectable from 50 to 100 Hz, while the analogue outputs carry an unfiltered copy of the inputs. GLM also provides phase matching in 15° steps, input gain of +6, +12 or +18 dB and 20 parametric notch filters. LFE level is set equal to the main channels or 10 dB higher. With the optional 9301A interface, four AES/EBU inputs support a 7.1 system including LFE.
On the RAM-SW, the power switch light is green in normal operation, red at amplifier clipping and yellow at thermal overload. Several units can be coupled for high SPL, with digital audio daisy-chained from the THRU AES/EBU output. Every unit is hand assembled and individually tested in Iisalmi, Finland.
Pairing
The matching monitors are Genelec SAM models on the same GLM network. Calibration needs either the 9320A SAM Reference Controller or the GLM Calibration Kit, both sold separately.
Alternatives
The 7380A is Genelec's single-driver SAM subwoofer, with a 381 mm driver and an 800 W Class D amplifier.