Hifiverse

Subwoofer - Genelec 7040A

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 7040A
Bildquelle - (c) Genelec

The 7040A is a very compact active subwoofer in Genelec's 7000 series. Genelec designed it to extend the bass reproduction of its 8010, 8020 and M030 active monitors in stereo applications, and as a transportable package, with an optional carry bag for mobile work.

Key specs that matter

One 165 mm magnetically shielded cone driver is driven by a 50 W class D amplifier. Free-field frequency response is 30 - 90 Hz (-6 dB) and 33 - 85 Hz (±3 dB). Maximum short-term sine wave output is 100 dB SPL (averaged from 40 to 85 Hz, in half space at 1 m). Self-generated noise is 5 dB or less, and harmonic distortion at 90 dB SPL is 2.5% or less for the 2nd and 1.5% or less for the 3rd harmonic. Inputs are two balanced XLR female connectors at 10 kOhm, and outputs are two XLR males. Input sensitivity for 100 dB SPL at 1 m is variable from +12 to -6 dBu. Power consumption is 0.5 W or less in ISS standby, 5 W idle and 70 W at full output, from a universal 100-240 V AC supply. Height is 410 mm, width 350 mm, depth 205 mm and weight 11.3 kg.

Engineering and use context

Genelec's patented Laminar Spiral Enclosure (LSE) is made from a spiral-shaped strip of steel. This spiral also forms the bass reflex port, with linear air flow at the highest SPL outputs.

Its bass management unit splits the input at 85 Hz. Frequencies below 85 Hz are reproduced by the subwoofer, and those above are sent through the output connectors to the main monitors at the same level as the inputs. The crossover section has a subsonic filter of 18 dB per octave below 35 Hz and midband rejection of 50 dB or more above 400 Hz. In free field the 7040A has the same sensitivity as the 8010, 8020 and M030.

Calibration uses DIP switches on the connector panel. Two Bass Roll-Off switches give 0 to -6 dB at 35 Hz in 2 dB steps, and two phase switches give 0 to -270 degrees in 90-degree steps. Intelligent Signal Sensing (ISS) sets the amplifier to standby when no input signal has been detected for one hour and resumes playback when a signal arrives. An ISS DISABLE switch, off from the factory, keeps the subwoofer powered continuously. Driver overload protection is part of the amplifier, together with thermal overload and short circuit protection.

The subwoofer comes with a 1.8 m mains cable and the operating manual. XLR signal cables are not included.

Pairing

A line-level source such as a mixing console or preamplifier is required, never the speaker outputs of an amplifier. The matching monitors are the Genelec 8010, 8020 and M030. Sources with unbalanced RCA outputs connect through RCA to XLR cables.

Alternatives

The 7050C is the larger Genelec 7000 series subwoofer, with a 205 mm driver, a 130 W amplifier and 5.1 inputs.

Spezifikationen

  • Modellbezeichnung

    7040A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    90

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    50

  • Größe (sm)

    41.0 x 35.0 x 20.5

  • Gewicht (kg)

    11.3

  • Offizieller Link

Weitere Komponenten