The W371A SAM Woofer System is an adaptive low-frequency loudspeaker system from Genelec, launched on 5 September 2019 and, in Genelec's words, not a simple traditional subwoofer. It works with the 8341A, 8351B and 8361A three-way coaxial monitors of The Ones family. One W371A is used with one main monitor, which typically sits on top of it, and the pair forms a full-range system. Finishes are dark grey, black and white.
Key specs that matter
A front 356 mm cone woofer and a rear 305 mm cone woofer are each driven by a dedicated 400 W Class D amplifier, with amplifier system THD below 0.01%. Cut-off points are 23 Hz and 500 Hz (-6 dB, anechoic, continued directivity mode), with an accuracy of ±3 dB from 25 Hz to 450 Hz. Short-term maximum SPL is ≥117 dB from 30 to 100 Hz and 120 dB from 100 to 500 Hz (half space, 1 m), and peak SPL is ≥123 dB with pink noise. At 100 dB SPL from 30 to 100 Hz, second harmonic distortion is ≤3% and third ≤2%. Self-generated noise is ≤15 dBA. The analogue XLR input (10 kOhm) accepts up to +25 dBu, and the AES/EBU input takes 16 - 24 bit at 32 - 192 kHz, each with a thru output. Consumption is below 2 W in ISS standby, 40 W at idle and 600 W at full output peak, from 100-240 V AC. Its MDF enclosure measures 1108 x 400 x 400 mm (H x W x D) with feet and weighs 61 kg.
Engineering and use context
Two woofer units make up the W371A. The top unit is a closed box and the bottom unit is a bass reflex ported box, and the signal path of each woofer has its own crossover, phase alignment, infrasound protection and overload protection. GLM offers three operating modes. Complementary, the default, runs the two woofers independently for a flat frequency response. Directive mode keeps the directivity of The Ones constant down to very low bass frequencies, and Null-steering modes aim the direction of minimum output at a back wall, side wall or floor to reduce its reflections. The default crossover range to the monitor is 150 - 250 Hz, selectable up to 300 Hz and no narrower than 50 Hz. After calibration GLM displays a flatness score and a correlation score. A blinking red front light shows amplifier overload protection, and blinking yellow shows overheat protection.
Pairing
The paired monitor connects to the analogue or AES/EBU thru output. A W371A system is not bass managed with a subwoofer, and a subwoofer can carry only the LFE channel in multichannel installations. Calibration needs the 9320A SAM Reference Controller or the GLM Calibration Kit.
Alternatives
The Genelec 7370A is a SAM subwoofer with a 305 mm driver and a 400 W Class D amplifier, reaching 19 Hz at -6 dB.