The QX-3 MKII is the smaller of the two-way floorstanding loudspeakers in the QX MKII series from Mission, the British loudspeaker brand of the IAG group. Its range reached the market in September 2021, and at launch this model cost GBP 799 per pair, below the QX-4 MKII and the three-way QX-5 MKII. Mission describes the MKII generation as an evolution of the original QX. Development combined listening sessions with computer-aided optimisation technology, crossover modelling and laser interferometry, and the engineers worked on the crossovers, components, materials and construction.
Key specs that matter
Enclosure type is bass reflex, with a cabinet volume of 35 litres. The transducer complement is two 135 mm long fibre composite cones and a 38 mm textile ring dome treble driver, with a crossover frequency of 2.0 kHz. Frequency response is 42 Hz - 24 kHz (±3 dB), and bass extension is 36 Hz (-6 dB). Sensitivity is 88 dB (2.0 V/1 m). Nominal impedance is 4 ohms (compatible 8 ohms), with a minimum of 3.8 ohms. Recommended amplifier power is 25 - 120 W, and peak SPL is 95 dB. Height on plinth is 950 + 20 mm, width is 195 mm and depth with terminals is 300 + 10 mm. Net weight is 20 kg per speaker.
Engineering and use context
Both bass drivers use an acrylic fibre cone material in Mission's DiaDrive System. Each cone has a seam-free curvilinear design with a conical support that has an increased area of contact with the voice coil.
On the ring dome, the textile material is formed in a double ring arrangement, and the centre is fixed with a visible phase plug. According to Mission, this prevents cancellation across the centre axis of high frequency waves produced near the centre of the diaphragm. Back pressure from the diaphragm is vented to a non-reflecting twin rear cavity to reduce resonance. Development cues for this treble unit came from the ZX series.
In the classic Mission IDG (Inverted Driver Geometry) format, the treble unit sits below the bass/midrange driver, so the path length is equalised and the sound waves coincide at the listener's head height. Serrated driver surrounds were refined with air-flow analysis and measurement to scatter reflections and reduce airflow interference. A colour co-ordinated aluminium top plate adds rigidity to the cabinet. Plinths and spikes are included. Finishes are Black Oak, Matte White and Walnut Pearl.
Pairing
An amplifier stable into 4 ohms is required. The terminal panel has shorting links and allows bi-wiring.
Alternatives
In the same series, the QX-4 MKII is the larger two-way floorstanding loudspeaker, with two 165 mm bass drivers in a 48 litre cabinet.