The ZX-5 is a three-way floorstanding loudspeaker in Mission's ZX Series, which Mission calls the most technologically advanced loudspeakers in its family. ZX models have a distinct industrial design and use purpose-designed bass driver cones, precision-engineered motor systems and advanced treble units, under the Mission motto Music leads, Technology follows. Finishes are gloss black and gloss white.
Key specs that matter
This is a bass reflex design with two 6.5-inch (165 mm) aluminium cone bass drivers, two 5.25-inch (130 mm) aluminium cone midrange drivers and a 1.5-inch (38 mm) ring dome treble driver. Crossover frequencies are 570 Hz and 2.5 kHz. Sensitivity is 91 dB (2.0 V/1 m). Nominal impedance is 4 ohms (compatible 8 ohms), with a minimum of 3.4 ohms. Frequency response is 36 Hz - 24 kHz (±3 dB), and bass extension is 30 Hz (-6 dB). Recommended amplifier power is 30 - 200 W, and peak SPL is 114 dB. Each speaker measures 1155 x 265 x (400 + 12) mm (H x W x D) and weighs 31.2 kg. It is not magnetically shielded.
Engineering and use context
In Mission's Ring Dome treble unit the centre of the dome is fixed and the voice coil is attached part of the way across it. The dome is formed into two rings with the voice coil between them, so that it drives the dome more accurately. Mission quotes lower distortion at frequencies up to 30 kHz and beyond.
Each DiaDrive bass/midrange unit has an advanced aluminium matrix cone and is vented to remove air trapped behind the diaphragm, which reduces resonance. A vented cover over the driver surround controls spurious output from the diaphragm edge. Over-size magnet systems are standard, and special bracing methods ensure that the bass diaphragms respond accurately to the signal waveform.
Matching serrations are built into the flare of the slot port. They streamline the high-pressure airflow at the port exit, and the asymmetric design breaks up the chuffing distortion of circular ports. Mission's Inverted Driver Geometry (IDG) positions the treble unit relative to the bass/midrange units to equalise acoustic path lengths. Peter Comeau, IAG's Head of Acoustic Design, worked on the integration of the drive units so that the speaker behaves as one system.
Pairing
An amplifier stable into 4 ohms is required. Its output should sit within Mission's recommended power range.
Alternatives
Mission's ZX-4 is the smaller floorstanding loudspeaker in the same ZX Series.