Hifiverse

Standlautsprecher - Mission Mission 700

Beschreibung, Bilder, technische Daten und Spezifikationen

Mission Mission 700
Bildquelle - (c) Mission

The Mission 700 is a two-way standmount loudspeaker that revisits the original Mission 700 of the 1980s. It is a sister model to the Mission 770, the model that marked Mission's return to UK manufacturing, and the 700 itself is made in China. Development was led by Peter Comeau, Mission's Director of Acoustic Design, and the new model closely resembles the original in appearance. Finishes are rose-tinted walnut or black real wood veneer (Walnut Pearl and Black Oak), with a laminated white front baffle.

Key specs that matter

This is a vented-box design with a 6.5-inch (165 mm) mineral-loaded polypropylene cone bass driver and a 1.25-inch (28 mm) soft dome treble driver, crossed over at 3.0 kHz. Sensitivity is 86 dB (2.83 V/1 m). Nominal impedance is 8 ohms, with a minimum of 5.2 ohms. Frequency response is 45 Hz - 20 kHz (±3 dB), with bass extension to 38 Hz (-6 dB). Recommended amplifier power is 25 - 150 W, and peak SPL is 106 dB. Cabinet volume is 24.8 litres. Each speaker is 510 mm high on its plinth, 260 mm wide and 270 + 22 mm deep with terminals, and weighs 12.8 kg.

Engineering and use context

Mission developed a new polypropylene bass/midrange driver with a model-specific motor system, for modern power handling while keeping the extended response of the original driver. Its rigid cast chassis and low-density surround were also revisited for improved rigidity and precision-controlled cone termination. A new lightweight coated microfibre dome is used for the treble, with a specially damped rear chamber for resonance control. Mission says the reflex port is profiled internally and externally for very low distortion and extension below 38 Hz in-room.

The original 700 was a precursor of Inverted Driver Geometry (IDG), now a Mission standard. With the treble unit below the bass/midrange driver, the path length is equalised so the sound waves coincide at the listener's head height. Positioning, spacing and alignment of the drivers are calculated for time alignment, and the crossover was developed with software-based mapping and simulation plus listening tests.

Its cabinet is a sandwich of differing woods bonded by a layer of damping adhesive, with internal bracing. Inside, a mixture of foam and long hair fibre absorbs internal resonance and reflections.

Pairing

An amplifier within Mission's recommended power range is required. The matching stand is the Mission 700 Stand of high carbon steel with internal damping and hardened stainless steel spikes, 485 mm high on spikes.

Alternatives

Mission's 770 is the larger UK-built standmount from the same revival of classic designs.

Spezifikationen

  • Modellbezeichnung

    Mission 700

  • Untere Grenzfrequenz +/- 3dB (Hz)

    45

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20000

  • Empfindlichkeit (dB at 1 W/1m)

    86

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    25 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    51.0 × 26.0 × 29.2

  • Gewicht (kg)

    12.8

  • Offizieller Link

Weitere Komponenten