The QX-5 MKII is the three-way floorstanding loudspeaker of Mission's QX MKII Series, the mid-level range between the entry LX MKII and the flagship ZX Series. Peter Comeau, Mission's acoustic director, led the development, and Mission engineers used computer-aided optimisation, crossover modelling and laser interferometry to tune the crossovers, components, materials and construction. Finishes are Black Oak, Matte White and Walnut Pearl, each with a colour-coordinated aluminium top plate.
Key specs that matter
This bass reflex design has one 300 mm (12 in.) long-throw cone bass driver, two 165 mm (6.5 in.) long fibre composite cone midrange drivers and a 38 mm textile ring dome tweeter. Crossover frequencies are 180 Hz and 1.8 kHz, and cabinet volume is 16 litres plus 48 litres. Frequency response is 32 Hz - 24 kHz (±3 dB), with bass extension to 27 Hz (-6 dB). Sensitivity is 90 dB (2.0 V/1 m), and peak SPL is 96 dB. Nominal impedance is 4 ohms (8 ohm compatible), minimum 3.5 ohms. Recommended amplifier power is 30 - 200 W. Height is 1100 mm plus a 20 mm plinth, width is 220 mm, and depth is 400 mm plus 10 mm for the terminals. Net weight is 34 kg per speaker.
Engineering and use context
Mission's ring dome tweeter uses woven textile formed in a double ring arrangement, with a phase plug fixed at its centre to prevent cancellation across the centre axis. Back pressure from the diaphragm is vented to a twin rear cavity to reduce resonance. An improved acrylic fibre cone material is used in the DiaDrive system, whose seam-free curvilinear design has a conical support with a larger contact area with the voice coil. Serrated driver surrounds, refined by air-flow analysis, scatter reflections and reduce airflow interference at the drivers and ports.
Like other QX models, the QX-5 MKII uses Mission's Inverted Driver Geometry (IDG), with the treble unit below the bass/midrange driver to equalise the path length at the listener's head height. Spikes and a plinth are supplied and secured to the base before use, and the aluminium top plate adds rigidity to the cabinet. Two pairs of terminals with shorting links are provided.
Pairing
An amplifier stable below 4 ohms is required. Its terminals allow bi-wiring or bi-amping with separate amplifiers for the LF and HF drive units. The matching subwoofer is the QX-12SUB MKII.
Alternatives
The QX-4 MKII is the smaller floorstanding loudspeaker of the series, a two-way design with two 165 mm bass drivers.