Hifiverse

Standlautsprecher - Mission ZX-3

Beschreibung, Bilder, technische Daten und Spezifikationen

Mission ZX-3
Bildquelle - (c) Mission

The ZX-3 is the smallest of the three floorstanding speakers in the ZX Series from Mission, the British loudspeaker brand that belongs to the International Audio Group together with Wharfedale. In all, the series comprises eight models - the ZX-1 and ZX-2 standmount speakers, the ZX-3, ZX-4 and ZX-5 floorstanding speakers, the ZX-C1 and ZX-C2 centre speakers and the on-wall ZX-S surround. It sits above the QX series, and Mission calls ZX the most technologically advanced loudspeakers in its family. Acoustic design was led by Peter Comeau, IAG's Head of Acoustic Design.

Key specs that matter

The ZX-3 is a two-way bass reflex design with one 38 mm ring dome tweeter and two 130 mm aluminium cone bass/midrange drivers, crossed over at 2.4 kHz. Frequency response is 42 Hz - 24 kHz (±3 dB), with bass extension to 38 Hz (-6 dB). Sensitivity is 90 dB (2.0 V/1 m). Nominal impedance is 4 ohms (8 ohm compatible), with a minimum of 3.4 ohms. Recommended amplifier power is 25 - 150 W, and peak SPL is 110 dB. Dimensions are 1025 x 240 x 362 mm (H x W x D, depth 350 mm plus 12 mm), and net weight is 20.4 kg.

Engineering and use context

In Mission's Ring Dome tweeter the centre of the dome is fixed and the voice coil is attached part of the way across it. The dome is thus formed into two rings with the voice coil in the centre, and Mission quotes lower distortion up to 30 kHz and beyond. Its DiaDrive bass/midrange unit has an aluminium matrix cone and is vented to remove trapped air behind the diaphragm and reduce resonance. In the ZX version a vented cover over the driver surround controls spurious output from the diaphragm edge.

Over-size magnet systems are standard on the ZX bass/midrange units, and special bracing methods secure their mechanical integrity. Serrations are built into the flare of the slot port, and this asymmetric design breaks up the chuffing distortion of circular ports. Mission's Inverted Driver Geometry of the bass/midrange and treble units equalises acoustic path lengths, and the series also uses a Symmetrical Driver Array.

Before use the included plinth and spikes are mounted on the ZX-3, and spike seats are supplied to protect the floor. Finishes are gloss black and gloss white.

Pairing

An amplifier rated into 4 ohms is required. The two pairs of terminals allow bi-wiring once the links are removed. Matching centre speakers are the ZX-C1 and ZX-C2, with the ZX-S for surround channels and the ZX-12 Sub for low frequencies.

Alternatives

The Mission ZX-4 is the three-way floorstanding speaker of the series, adding a 130 mm midrange driver to the same tweeter and twin bass units, with crossovers at 530 Hz and 2.7 kHz.

Spezifikationen

  • Modellbezeichnung

    ZX-3

  • Untere Grenzfrequenz +/- 3dB (Hz)

    42

  • Obere Grenzfrequenz +/- 3dB (Hz)

    24000

  • Empfindlichkeit (dB at 1 W/1m)

    90

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    25 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    102.5 × 24.0 × 36.2

  • Gewicht (kg)

    20.4

  • Offizieller Link

Weitere Komponenten