Hifiverse

Standlautsprecher - PMC prodigy5

Beschreibung, Bilder, technische Daten und Spezifikationen

PMC prodigy5
Bildquelle - (c) PMC

The prodigy5 is the floorstanding model of PMC's prodigy range, a passive two-way loudspeaker designed and built in-house in Britain by The Professional Monitor Company. Its sibling in the two-model range is the compact prodigy1 standmount. The footprint is small, taking up no more floor space than bookshelf speakers on stands, and PMC uses an extended Advanced Transmission Line with twin Laminair vents in it.

Key specs that matter

Drive units are a PMC 133 mm (5.25 in.) natural fibre long-throw LT bass driver and a PMC 27 mm (1 in.) soft-dome tweeter, with a crossover frequency of 1.7 kHz. Effective ATL length is 1.96 m. Frequency response is 35 Hz - 25 kHz (-3 dB). Sensitivity is 87.3 dB SPL (1 W/1 m), nominal impedance is 6 ohms and peak SPL is 124 dB. Recommended amplifier power is 20 - 250 W. Horizontal directivity is 80 degrees and vertical directivity is 70 degrees. Input connectors are one pair of 4 mm binding posts. Dimensions are 905 x 165 x 237 mm (H x W x D), with 20 mm added by the spikes, 233 mm width including the plinth bars and 10 mm depth added by the optional grille. Each speaker weighs 10 kg.

Engineering and use context

ATL is the bass-loading principle of all PMC speakers. In the prodigy5 the highly braced cabinet is lined with proprietary acoustic materials that absorb all but the very lowest frequencies, and these exit from a front vent. PMC states that the bass extension does not change with volume level. Laminair vents apply F1 aerodynamic principles to the vent, reducing resistance and airflow noise as air moves in and out of the cabinet at high speed.

The soft-dome tweeter is derived from PMC's result6 studio nearfield monitor and is also used in the custom installation range. Like all PMC bass drivers, the LF unit is optimised for use with the ATL. It has a natural fibre dished diaphragm with an inverted dust-cap, a high-power voice coil, a ferrite magnet and a long-excursion suspension. Drivers and crossover designs are taken from PMC studio monitors.

Every component is tested, measured and matched, and each speaker is checked in production against a reference sample. Spikes and pucks are included, the pucks protecting hard floors. The binding posts accept spade lugs, 4 mm banana plugs and bare wire. Finish is Silk Black, and the magnetically attached grille is an option.

Pairing

A stereo amplifier within PMC's recommended power range is required. The single pair of binding posts allows single-wiring only. PMC states that both prodigy models can be mixed with other PMC speakers in multichannel systems.

Alternatives

The prophecy5 is the floorstanding model of PMC's prophecy range.

Spezifikationen

  • Modellbezeichnung

    prodigy5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    87.3

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    20 - 250

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    90.5 × 16.5 × 23.7

  • Gewicht (kg)

    10

  • Offizieller Link

Weitere Komponenten