Hifiverse

Standlautsprecher - PMC prophecy9

Beschreibung, Bilder, technische Daten und Spezifikationen

PMC prophecy9
Bildquelle - (c) PMC

The prophecy9 is a three way PMC tower, engineered and handcrafted in Britain, that sits above the prophecy7 and prophecy5 in the prophecy line. It carries four drive units in an enclosure loaded by PMC's Advanced Transmission Line, abbreviated ATL.

Key specs that matter

PMC fits two 125 mm LTXL bass drivers with mineral filled cones on cast alloy chassis, plus a 55 mm soft dome midrange unit and a 27 mm soft dome tweeter, with crossover points at 600 Hz and 3.2 kHz. PMC quotes a frequency response of 35 Hz to 20 kHz at -3 dB, a sensitivity of 91.5 dB SPL at 1 W and 1 m, and a nominal impedance of 4 ohm, with a recommended amplifier power range of 30 to 300 W. The enclosure stands 1030 mm high plus 20 mm of spikes, 165 mm wide and 360 mm deep, and the terminals add 23 mm and the grille 10 mm to that depth. Each speaker weighs 28.1 kg.

Engineering and use context

Within the enclosure PMC folds the transmission line to an effective length of 2.57 m, loading the rear of the two bass drivers so that low frequency extension comes without a large box. The line terminates at the bottom of the enclosure through a LaminairX extruded aluminium plinth, which PMC designed to smooth the airflow at the opening and reduce turbulence when the drivers work hard. A transmission line works by guiding the rear output of the woofers along a long damped path to an opening, extending low frequency output compared with a sealed box of the same outer volume. The dedicated midrange dome keeps the mid band on a driver separate from both the woofers and the tweeter. The long throw bass drivers have high power handling, according to the maker. Connection is through one pair of 4 mm binding posts in satin nickel, so the design is single wired only and separate treble and bass cable runs cannot be used. With spikes fitted, the height places the tweeter and midrange dome near seated ear level in a typical living room. Three wood finishes are offered, namely medium oak together with a blackened and a natural walnut veneer.

Pairing

With its narrow front and moderate depth, the prophecy9 suits living rooms of 20 m2 and larger where a slim tower is preferred. The low nominal impedance is best driven by transistor electronics comfortable with low impedance loads, while the high sensitivity means modest power already reaches useful levels.

Alternatives

The PMC prophecy7 is a smaller prophecy tower using a single bass driver, 965 mm tall and 23.7 kg.

Spezifikationen

  • Modellbezeichnung

    prophecy9

  • Untere Grenzfrequenz +/- 3dB (Hz)

    35

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    91.5

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    30 - 300

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    103.0 × 16.5 × 36.0

  • Gewicht (kg)

    28.1

  • Offizieller Link

Weitere Komponenten