The PMC10-4 XBD is the dual-cabinet version of the PMC10-4 main monitor from PMC (The Professional Monitor Company), unveiled at NAMM 2026 with the rest of the Main Monitor Series. Each side combines the PMC10-4 three-way cabinet with an XBD cabinet of the same size that carries only bass drivers, ten drivers per side in all. Like the single-cabinet model, it follows the layout and visual language of the QB1, which PMC developed in close collaboration with Capitol Studios engineers, and it is intended for large recording and mixing rooms.
Key specs that matter
Type is a 3-way, ten-driver, dual-cabinet ATL active reference monitor. Drive unit complement is LF 8 x 254 mm, MF PMC75 and HF 34 mm. Effective ATL length is 2 x 3.4 m. Frequency response is 19.5 Hz - 25 kHz. Max continuous SPL is 116.5 dB and max peak SPL is 140.5 dB. Amplifier power per channel is 9600 W (HF 800 W, MF 800 W, LF 8 x 1000 W). Inputs are analogue and digital (up to 192 kHz). Each cabinet measures 820 x 1040 x 523 mm (H x W x D), plus 10 mm for the LF driver surround, and the stack is 1640 mm high. Weights are 140 kg (Master 3-way) and 130 kg (SUBxbd), 270 kg per side.
Engineering and use context
Eight in-house ultra-long-throw bass drivers are used, four in each of the two latest-generation ATL cabinets with LaminairX airflow venting. PMC specifies heavily vented motor assemblies, dual-spider suspensions and triple-wound voice coils for this driver generation, with up to 36 mm of linear excursion. In the main cabinet a 34 mm soft-dome tweeter and the PMC75v3 midrange share the n-compass waveguide for controlled dispersion.
Per channel the system uses one master36 DSP/amplifier and three power20 amplifiers. The master36 delivers 800 W to each of the tweeter and midrange and 1000 W to each driver of the first bass pair. Each power20 unit drives one further pair - the second pair in the primary cabinet and both pairs in the XBD cabinet. Every unit is a 3U chassis, and the power20 is a 2000 W Class-D amplifier.
The three power20 units are linked to the master36 through PMC's masterlink connection system. Illuminated logos in each cabinet give system status feedback, and the master36 DSP provides crossovers and system protection.
Pairing
A console or monitor controller with analogue or digital outputs is required. Settings are made in PMC's SoundAlign2 browser-based interface over a wired Ethernet connection. A PMC10-4 SUB is offered as a matching option.
Alternatives
The PMC15 XBD is the dual-cabinet system of the same series with two 381 mm bass drivers and 5600 W per channel.