The PMC10-4 is a single-cabinet active main monitor from PMC (The Professional Monitor Company), designed from the ground up for large recording and mixing rooms. It is one of the four launch models of the Main Monitor Series, unveiled at NAMM 2026 for the company's 35th anniversary and built entirely in-house. Its layout and visual language follow the QB1, the PMC main monitor developed in close collaboration with Capitol Studios engineers.
Key specs that matter
Type is a 3-way ATL active reference monitor. Drive units are four 254 mm ultra-long-throw LF drivers, a PMC75v3 midrange and a 34 mm soft-dome tweeter. Effective ATL length is 3.4 m. Frequency response is 19.5 Hz - 25 kHz. Max continuous SPL is 116.5 dB and max peak SPL is 134.5 dB. Amplifier power per channel is 5600 W (HF 800 W, MF 800 W, LF 4 x 1000 W). Inputs are analogue and digital (up to 192 kHz). Cabinet size is 820 x 1040 x 523 mm (H x W x D), plus 10 mm for the LF driver surround, and complete cabinet weight is 140 kg.
Engineering and use context
All four bass drivers are in-house designs and load the latest generation of PMC's Advanced Transmission Line, with LaminairX airflow venting. PMC lists heavily vented motor assemblies, dual-spider suspensions and triple-wound voice coils for this driver generation, with up to 36 mm of linear excursion. In the same cabinet, the tweeter and the PMC75v3 midrange share PMC's n-compass waveguide for controlled dispersion.
Each channel uses two outboard units. A master36 DSP/amplifier, a 3U chassis with 32-bit DSP crossover processing and six Class-D amplifiers, drives the tweeter, the midrange and two of the bass drivers. A power20, a 2000 W Class-D amplifier in a matching 3U chassis, powers the remaining pair.
Both units are linked by PMC's masterlink connection. The DSP provides the crossovers and system protection, and a discreet illuminated logo beneath the midrange driver gives system status feedback.
Pairing
A console, monitor controller or audio interface with analogue or digital outputs is required. Settings for EQ, delay, polarity and crossovers are made in the SoundAlign2 browser-based software over a network. The matching PMC10-4 SUBXBD cabinet converts the system into the PMC10-4 XBD, and a PMC10-4 SUB is also offered.
Alternatives
The PMC15 is the single-cabinet 3-way model of the same series, with one 381 mm bass driver and 16 Hz - 25 kHz response.