Hifiverse

Standlautsprecher - PMC ACTIVE twenty5.23i

Beschreibung, Bilder, technische Daten und Spezifikationen

PMC ACTIVE twenty5.23i
Bildquelle - (c) PMC

The ACTIVE twenty5.23i is a two-way active floorstanding loudspeaker from PMC, the Professional Monitor Company of Biggleswade, England. It is the active version of the twenty5.23i, PMC's best-selling model in passive form, with an active crossover and built-in amplification added to each speaker. PMC introduced the Active twenty5i series of four two-way models at the Bristol HiFi Show in February 2024, with the Active twenty5.23i priced at GBP 5,975. Diamond Black, Oak and Walnut are among the finishes shared across the range.

Key specs that matter

Drive units are a PMC 5.5-inch (140 mm) long-throw g-weave cone LF unit with cast alloy chassis and a PMC/SEAS 19 mm twenty5i series SONOMEX fabric soft dome HF unit, ferrofluid cooled, with 34 mm surround and dispersion grille. Crossover frequency is 1.75 kHz. Frequency response is 28 Hz - 25 kHz, and effective ATL length is 2.4 m. Amplification is HF 100 W rms plus LF 100 W rms. Gain is 1 Vrms = 96.5 dB SPL at 1 m (low setting) or 106.5 dB SPL at 1 m (high setting). Input impedance is above 14 kohms. Directivity is 90 degrees horizontal and 90 degrees vertical. Dimensions are 907 x 162 x 330 mm (H x W x D), or 238 mm wide with plinth bars, and weight is 15.15 kg.

Engineering and use context

Bass loading is PMC's Advanced Transmission Line (ATL). The highly braced cabinet is lined with acoustic materials that absorb all but the lowest frequencies, and these exit from a front-panel vent. That vent is the Laminair aerodynamic vent, which according to PMC reduces turbulence and drag at the line exit.

The signal enters through a balanced XLR or unbalanced RCA analogue input and passes RFI and EMI filtering, a dual-band power limiter and a pure analogue active crossover with 24 dB per octave slopes. Two Class-D amplifiers follow, one for each driver, with non-invasive driver protection sensors. PMC states that the amplifier design compensates for driver impedance variations with frequency. A rear sensitivity switch lowers gain by 10 dB from the default high setting, and mains input is an IEC C14 socket. Plinth bars with spikes attach on M8 bolts, isolated from cabinet and floor by compliant rings.

Pairing

A preamplifier or a streamer with a volume control is required. The balanced XLR and unbalanced RCA inputs accept line-level signals, and only one should be connected at a time. Amplifier speaker outputs must not be connected.

Alternatives

The ACTIVE twenty5.24i is the larger two-way floorstanding model of the same series, with a 170 mm LF unit and a 3 m effective ATL.

Spezifikationen

  • Modellbezeichnung

    ACTIVE twenty5.23i

  • Untere Grenzfrequenz +/- 3dB (Hz)

    28

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    90.7 × 16.2 × 33.0

  • Gewicht (kg)

    15.15

  • Offizieller Link

Weitere Komponenten