LRS+ is a two-way quasi-ribbon floorstanding loudspeaker from Magnepan of the USA, a maker of planar panel speakers since the 1960s. It follows the LRS and is the entry model among Magnepan's floorstanding speakers. Magnepan sells it direct at USD 1,295 per pair with free shipping, in Black or Off White fabric.
Key specs that matter
It uses aluminium foil drivers and a Magneplanar quasi-ribbon tweeter. Frequency response is 50 Hz - 20 kHz. Sensitivity is 86 dB (2.83 V, 500 Hz, 1 m), and impedance is 4 ohms. Each panel measures 48 x 12-7/8 x 1 in (H x W x D), about 1219 x 327 x 25 mm. Shipping weight is 45 lb per pair, in a carton of 18 x 53 x 4 in.
Engineering and use context
Pairs are matched and mirror-imaged, with serial numbers ending in 1 and 2. Speaker cables connect to a high-current connector that accepts banana plugs or bare wire, clamped by a set screw tightened with the supplied Allen wrench. Spade lug adapters are available from Magnepan.
On the connection plate a tweeter attenuator jumper gives maximum tweeter level. Replacing it with one of the supplied 1 or 2 ohm resistors attenuates the tweeter by 1 to 4 dB. Protection is by a 2.5 A Type 3AG fuse, normal or fast blow, and the maximum permitted value is 3 A. The tie-downs are asymmetrical, three on the -1 speaker and one on the -2 speaker. Magnepan states that each panel is optimised for smooth frequency response. Feet with flippers at their ends are screwed to the back of each panel and allow it to be tilted.
At high volume excessive current through the foil heats the aluminium and makes it expand, so rippling, edges or tenting can appear. Magnepan classes this as cosmetic and warns against pressing the foil flat.
Pairing
An amplifier stable into 4 ohms is required. Magnepan recommends speaker cable of 16 gauge or larger.
Alternatives
The 1.7i is the next larger quasi-ribbon floorstanding loudspeaker in the Magnepan range.