Hifiverse

Standlautsprecher - Magnepan Magnepan 2.7i

Beschreibung, Bilder, technische Daten und Spezifikationen

Magnepan Magnepan 2.7i
Bildquelle - (c) Magnepan

The MG2.7i is a three-way, full-range Magneplanar loudspeaker from Magnepan and marks the return of the two series, one of the company's earliest model lines. Magnepan places it between the MG1.7i and MG3.7i and describes it as an MG1.7i with a True Ribbon Tweeter or a lighter MG3.7i. Apart from the Mini Maggie desktop models, it is the smallest Magnepan with a True Ribbon Tweeter. Prices at the launch on 15 November 2023 were USD 5,995 per pair, or USD 10,000 for the upgraded MG2.7x.

Key specs that matter

Frequency response is 40 Hz - 30 kHz (±3 dB). Sensitivity is 86 dB (500 Hz, 2.83 V/1 m) and impedance is 4 ohms nominal. Its True Ribbon Tweeter is 1,016 mm long. Each panel measures 1,803 x 559 x 44 mm (H x W x D) and weighs 22 - 24 kg, and the carton weighs 50 - 54 kg. Warranty is limited to 3 years for the original purchaser.

Engineering and use context

Bass and midrange sections use aluminium foil adhered to a Mylar diaphragm, an arrangement often called quasi-ribbon. In the True Ribbon Tweeter the aluminium foil is not mounted to a substrate and is suspended freely. The conductor foil on the Mylar reacts with a fixed array of magnet strips mounted behind it, while the tweeter foil reacts with the magnet channels on either side of it. Both radiate as a dipole, forward and backward.

Separate MIDRANGE/ATTENUATOR and TWEETER/ATTENUATOR terminals are bridged by banana jumpers. Four 1 ohm ceramic resistors are supplied for attenuating the tweeter and midrange sections, a half-ohm resistor is sold separately, and Magnepan allows values up to 2 ohms. Fuses protect the sections, and the carton includes two spare 2.5 A 3AG fast-blow fuses for the tweeter and two 4 A fuses for the midrange. According to Magnepan, an amplifier must never be connected to the attenuator terminals, and bi-amping voids the warranty. The AMPLIFIER terminal screws take bare wire up to 10 gauge or banana plugs, and spade lug adaptors are available separately.

Fabric options are black, grey, off-white and cherry white, and standard stiles come in dark cherry, natural oak, or black, silver and gold aluminium. The X version adds acorn oak, bamboo, red aluminium and black wood, plus copper-rich polypropylene capacitors, air-core coils made at Magnepan, left and right crossovers matched in value, and silver-soldered connections. Both versions come with black or off-white T-feet, and oval bases cost USD 250 extra.

Pairing

An amplifier able to produce at least 160 W per channel (RMS) into 4 ohms is required. Bi-amping is not supported. Magnepan sets no upper power limit.

Alternatives

The MG3.7i is the larger Magneplanar floorstanding model above it, also with a True Ribbon Tweeter.

Spezifikationen

  • Modellbezeichnung

    Magnepan 2.7i

  • Untere Grenzfrequenz +/- 3dB (Hz)

    40

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Empfindlichkeit (dB at 1 W/1m)

    86

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    180.3 × 55.88 × 4.44

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten