Hifiverse

Standlautsprecher - Magnepan Magnepan 20.7

Beschreibung, Bilder, technische Daten und Spezifikationen

Magnepan Magnepan 20.7
Bildquelle - (c) Magnepan

The Magnepan 20.7 is a three-way, full-range dipole loudspeaker from Magnepan, the White Bear Lake, Minnesota maker of Magneplanar panel speakers. It replaced the earlier 20.1. Like the other floor-standing Magneplanars, it is offered with Natural Oak, Black Oak, Dark Cherry, Black Aluminum or Silver Aluminum trim and Off White, Cherry White, Black or Dark Grey cloth.

Key specs that matter

Magnepan describes it as a 3-way, full-range ribbon speaker with quasi-ribbon bass, quasi-ribbon midrange and a true ribbon tweeter. Frequency response is 25 Hz - 40 kHz. Sensitivity is 86 dB (500 Hz, 1 m, 2.83 V), and nominal impedance is 4 ohms. Each panel measures 737 x 2007 x 52 mm (W x H x D). A pair has a shipping weight of 159 kg. Warranty is a limited five years to the original owner, with one year on the ribbon tweeter.

Engineering and use context

In the true ribbon tweeter an ultra-thin aluminium foil carries the current from the amplifier and also moves the air, with no voice coil, cone or surround. Magnepan gives the element a thickness of one tenth of a human hair and calls the tweeter a direct-coupled, 360 degree radiating dipole. Its quasi-ribbon midrange and bass drivers are a true ribbon on a Mylar film, with a thin aluminium strip attached by hand. Of the total radiating area, 76% is bass. Neither driver type needs a transformer, and Magnepan states that both are non-reactive and present a load close to a simple resistor.

Each tweeter ships separately and is screwed into pre-drilled holes in the narrow fabric section of the panel, with protective strips and end covers. Pairs are matched and mirror-imaged. According to Magnepan, the phase characteristics are achieved without compensation networks. A jumper or a resistor must be installed for the tweeter to operate, and four 1 ohm resistors come in the carton for tweeter and midrange attenuation. Fuse values are 5 A Type 3AG for the midrange and 2.5 A for the tweeter, and the bass section is not fused. High-current terminals take speaker cable up to 10 AWG (5.3 mm2) or banana plugs locked by set screws. Feet, rear handles and wooden handles are included.

Pairing

An amplifier able to drive a 4 ohm load is required. The midrange and tweeter fuse values must not be increased or bypassed.

Alternatives

The Magnepan 3.7i is a smaller three-way model with a true ribbon tweeter and a 35 Hz - 40 kHz frequency response.

Spezifikationen

  • Modellbezeichnung

    Magnepan 20.7

  • Untere Grenzfrequenz +/- 3dB (Hz)

    25

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Empfindlichkeit (dB at 1 W/1m)

    86

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    73.66 × 200.6 × 5.24

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten