Hifiverse

Standlautsprecher - Magnepan Magnepan 3.7i

Beschreibung, Bilder, technische Daten und Spezifikationen

Magnepan Magnepan 3.7i
Bildquelle - (c) Magnepan

The Magnepan 3.7i is a floorstanding loudspeaker from Magnepan of White Bear Lake, Minnesota. It followed the 3.7, which had replaced the 3.6, and owners of the 3.7 were offered a factory upgrade to the i specification. Magnepan describes the 3.7i as the first model in its floor-standing lineup to incorporate its ribbon tweeter. Standard and X versions are available.

Key specs that matter

It is a 3-way, full-range ribbon speaker with a quasi-ribbon bass section, a quasi-ribbon midrange and a true ribbon tweeter in one panel. Frequency response is 35 Hz - 40 kHz, given as the average level in normal installations. Sensitivity is 86 dB (500 Hz, 2.83 V/1 m) and nominal impedance is 4 ohms. Each panel measures 610 x 1,803 x 41 mm (W x H x D). Warranty is three years to the original owner and one year on the ribbon tweeter.

Engineering and use context

According to Magnepan, the phase characteristics of the 3.7i are achieved without the use of compensation networks. Pairs are matched and mirror-imaged, with the tweeter located in the narrow fabric section of each panel.

The midrange is protected by a fuse of no more than 5 A, type 3AG normal or fast-blow, and the tweeter by a 2.5 A fuse, while the bass section is unfused. Relative levels of the bass, midrange and tweeter can be adjusted, and tweeter and midrange attenuation is set with a resistor in place of the jumper. Four 1-ohm resistors and two jumpers are included, other resistor values are available to order, and the speakers are shipped with the tweeters disconnected. Optional Maggie Bass Panels add bass diaphragm area.

Each panel stands on an oval base, attached with L-shaped brackets and supporting braces. Fabric comes in Black, Grey, Off White or Cherry White. Standard stiles are Dark Cherry, Natural Oak, Black Aluminum, Silver Aluminum and Gold Aluminum, and the X version adds Acorn Oak, Bamboo, Red Aluminum and Black Wood.

Pairing

An amplifier stable into a 4-ohm load is required. The high-current connectors accept bare speaker cable up to 5.3 mm2 or banana plugs, locked with set screws and the supplied Allen wrench. Spade lugs need Magneplanar spade lug adapters.

Alternatives

The Magnepan 20.7 is the larger floorstanding model in the range, with 76% of its total radiating area devoted to bass.

Spezifikationen

  • Modellbezeichnung

    Magnepan 3.7i

  • Untere Grenzfrequenz +/- 3dB (Hz)

    35

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Empfindlichkeit (dB at 1 W/1m)

    86

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    60.96 × 180.34 × 4.13

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten