The KADENZ is a single dynamic driver in-ear monitor from Moondrop, which the company calls the final flagship of its dynamic driver K-Series. It uses the second generation of Moondrop's patented ULT super-linear dynamic driver, a stainless steel shell and replaceable nozzles. Two cables are supplied, an analogue Litz cable and the ECHO-B USB-C decoding cable with a 4.4 mm balanced output.
Key specs that matter
The driver is a 10 mm ULT-Gen2 patented dynamic driver with a TAC diamond-coated dome composite diaphragm. Sensitivity is 122 dB/Vrms (1 kHz). Impedance is 35 ohms ±15% (1 kHz). Frequency response is 8 Hz - 21 kHz (IEC 61094, free field), and the effective frequency response is 20 Hz - 20 kHz (IEC 60318-4, -3 dB). THD is ≤0.03% (1 kHz, 94 dB). The cable connects through 0.78 mm 2-pin sockets.
Engineering and use context
Its irregular magnetic circuit was designed with FEA simulation and topology optimisation, has pressure balance channels and uses internal and external composite N55 magnets. A dome-shaped vent suppresses treble standing waves inside the diaphragm and protects the diaphragm and coil. The TAC diaphragm has an LCP (liquid crystal polymer) dome substrate with a diamond layer of SP3 bonds and a high-damping polyurethane suspension. Moondrop pairs an integrated brass internal acoustic cavity with an external waveguide against high-frequency phase interference, and the cavity was refined through simulation and 3D printing tests.
Shells are cast in stainless steel by MIM powder metallurgy, with a subtly granular inner surface that helps suppress standing waves. After hand-polishing, every surface is sandblasted to a matte finish. Three nozzles, A, B and C, have different physical specifications for the treble coupling of different ear canals, and each carries a third-generation patented anti-blocking filter. The gold-plated 0.78 mm 2-pin sockets are sunken. Tuning follows the VDSF target, measured on a B&K 5128.
Pairing
The analogue cable is single-crystal copper, silver-plated Litz, with replaceable 3.5 mm single-ended and 4.4 mm balanced plugs. Through a USB-C plug, the ECHO-B cable decodes PCM up to 32-bit/384 kHz and has a 4.4 mm fully balanced output, 120 dB SNR, 1.9 µVrms noise and 0.003% THD. It works with Mac, PC, Android and iOS without a driver, and the MOONDROP app gives five built-in tunings and a parametric equaliser. Ear tips and spring tips in S, M and L, an adapter and a leather case are included.
Alternatives
The Moondrop ARIA2 is another wired in-ear monitor with a single dynamic driver.