The Moondrop Horizon is a wired full-size over-ear headphone with a 50 mm dynamic driver, sold under the full name Horizon Professional 50mm Dynamic Driver Over-ear Headphone. Moondrop describes the driver as a newly designed ULT unit, and the earcups take a detachable cable through dual 3.5 mm connectors. It is the dynamic-driver model in the Moondrop full-size line, next to the planar PARA2.
Key specs that matter
Driver - 50 mm UHE dynamic driver. Impedance is 32 ohms ±15% (1 kHz), and sensitivity is 109 dB/Vrms (1 kHz). Frequency response is 20 Hz - 34 kHz (IEC61094, free field), with an effective frequency response range of 20 Hz - 20 kHz (IEC60318-4, -3 dB). Total harmonic distortion is 0.1% or lower (1 kHz, 94 dB). Plug options are a 4.4 mm balanced plug and a 3.5 mm single-ended plug, and the headphone connector is dual 3.5 mm.
Engineering and use context
Its magnet system is an FEA-optimised dual internal-external composite magnet circuit, and Moondrop quotes a peak magnetic flux density of 1.85 T in the magnetic gap. The composite diaphragm combines a titanium-plated PEN dome with a double-layer liquid silica gel suspension. According to Moondrop, the ULT superlinear driver design is aimed at ultra-low nonlinear distortion.
Each driver sits in a newly designed large-angle inclined structure, which Moondrop calls natural high-transmission auricle acoustic coupling. Both earcups use the universal dual 3.5 mm interchangeable cable design.
In the box are the Horizon, two earpads, the cable, a manual, an anime card, certificates and a service card.
Pairing
A headphone output with a 4.4 mm balanced socket or a 3.5 mm single-ended socket is required. Aftermarket cables must use dual 3.5 mm plugs at the headphone end.
Alternatives
The Moondrop PARA2 is the planar magnetic full-size headphone of the brand, with a 100 mm diaphragm and 9 ohm impedance.