The Moondrop PARA2 is a full-size planar magnetic headphone with a 100 mm diaphragm and a wired, detachable cable. Moondrop names its drive concept FDT (Full Drive Tech) and specifies the headphone for high sensitivity and low impedance. It is the planar model in the Moondrop full-size line, next to the dynamic-driver Horizon.
Key specs that matter
Impedance is 9 ohms ±15% (1 kHz), and sensitivity is 106 dB/Vrms (1 kHz). Frequency response is 20 Hz - 42 kHz (IEC61094, free field), with an effective frequency response of 20 Hz - 20 kHz (IEC60318-4, -3 dB). THD is 0.03% or lower (1 kHz, 94 dB). The earphone jack is dual 3.5 mm, and the cable ends in a 4.4 mm balanced plug.
Engineering and use context
Its 100 mm diaphragm is 1.2 µm thick, and Moondrop applies secondary diaphragm stress balance technology to it. Behind it is an N55 magnet array optimised by FEA (finite element analysis). Driver and cavity form one integrated, lightweight high-strength structure.
Both earcups use the universal dual 3.5 mm interchangeable cable design. The supplied cable is made of 6N purity single crystal copper and is terminated in a 4.4 mm balanced plug, and a 4.4 mm to 3.5 mm adapter is included for single-ended sources.
Sheepskin earpads attach magnetically for simple replacement. The housing has a full stainless steel brushed finish, in what Moondrop calls a Bauhaus industrial design.
Package contents are the PARA2, two earpads, the 4.4 mm balanced cable, the 4.4 mm to 3.5 mm adapter, a manual, an anime card, certificates and a service card.
Pairing
A headphone output with a 4.4 mm balanced socket is required, or a 3.5 mm single-ended socket with the supplied adapter. The source must be stable into a 9 ohm load. Aftermarket cables must use dual 3.5 mm plugs at the headphone end.
Alternatives
The Moondrop Horizon is the dynamic-driver full-size headphone of the brand, with a 50 mm driver and 32 ohm impedance.