The Concerto is an in-ear monitor from the Chinese maker Moondrop, sold under the full name Concerto In-Ear Monitor with USB-C Decoding. It launched around November 2024 at USD 329.99, alongside the Kadenz. Each earpiece pairs an xMEMS solid-state driver with a planar driver, and USB decoding is integrated, so the Concerto connects to a digital source over USB-C.
Key specs that matter
Each side has an xMEMS all-silicon solid-state Montara driver and a 13 mm superlinear planar driver. THD is ≤0.05% (1 kHz, 94 dB), and effective frequency response is 20 Hz - 20 kHz (IEC60318-4, 3 dB). A USB decoding chip supports 32-bit/384 kHz under the UAC 2.0 and UAC 3.0 protocols over a USB-C plug. Moondrop co-developed the cable and connector with ddHiFi. Its data section is approximately 85 cm long and the signal section about 35 cm, with a three-button line-control microphone. The cavities are 3D-printed from medical resin.
Engineering and use context
Montara is the larger xMEMS part, measuring 6.05 x 8.4 x 1.15 mm in its top-firing form, and Moondrop uses it above 8 kHz. Because an xMEMS driver needs a dedicated high-voltage single-channel amplifier with bias, each Montara has its own Aptos power amplifier chip. Standard audio output channels drive the planar unit separately, so treble and mid-bass have independent outputs.
The planar unit is an annular double-suspension, four-magnet design covered by Chinese utility model patent ZL 2023 2 2999191.4. It combines features of a planar magnetic and a dynamic driver. Moondrop quotes a conversion efficiency more than 10 times that of a traditional planar driver and about 4 times that of a dynamic driver of the same size.
Both drivers sit in a V-shaped opposed acoustic arrangement, with their vibration areas at a sharp included angle. Sound from each reaches the ear canal over almost the same distance. An integrated natural coupling cavity reduces the effect of a conventional acoustic crossover structure on the upper treble. Tuning follows Moondrop's VDSF Target Response, a curve based on the HRTF of a B&K HATS under diffusion and an ideal room preference curve.
In the cable, the data section has a twisted mesh sleeve of cotton and polyester yarn with conductors twisted at equal intervals. The signal section has a composite PVC jacket and mutually insulated conductors. A CNC-machined splitter is used. Included in the box are ear tips in S, M and L, a user manual, a certificate and a service card.
Pairing
A source with a USB-C port and USB Audio Class support is required. Phones on iOS or Android and PCs are supported.
Alternatives
The Moondrop Kadenz is an in-ear monitor with a single dynamic driver and a detachable cable, launched at the same time.