The LAN 2, written LAN II by Moondrop, is a wired in-ear monitor with a single dynamic driver and an interchangeable cable, designed and made by the company in Chengdu. Moondrop launched it on 17 September 2025 at USD 59.99. Two versions are sold at the same price, LAN II_REF and LAN II_POP. Both use the same driver, materials and structure, and both come with the same cable and accessories. REF has a tuning focused on the mid-high frequencies, while POP is tuned for the mid-bass and vocal range.
Key specs that matter
Each housing holds a 10 mm double-cavity dynamic driver with a glass dome composite diaphragm. Impedance is 30 ohms ±15% (1 kHz), and sensitivity is 118 dB/Vrms (1 kHz). THD is rated at ≤0.08% (1 kHz, 94 dB). Frequency response is 12 Hz - 60 kHz (IEC61094, free field), with an effective range of 20 Hz - 20 kHz (IEC60318-4, -3 dB). Its housings are MIM powder stainless steel. The cable connects through 0.78 mm 2-pin sockets and ends in a 4.4 mm balanced plug.
Engineering and use context
At the centre of the diaphragm sits a solid glass dome only 0.05 mm thick, formed in a high-precision mould by a glass-making process. Moondrop quotes a very high Young's modulus and a high internal resistance coefficient for it. A flexible composite suspension was designed specifically for the glass dome and has a more linear long-stroke strain.
The motor is an internal and external magnetic composite circuit with two concentric N52 magnets and an OFC voice coil. Moondrop optimised it by finite element simulation in COMSOL and specifies a uniform, symmetrical flux density above 1 T in the gap. Shells are made by metal injection moulding from stainless steel powder and high-temperature sintering, and both versions carry laser-engraved patterns on the faceplates. Frequency response follows the Moondrop VDSF Target Response, measured on a B&K 5128.
Compared with the original LAN, which had a beryllium-plated dome, 32 ohms, 120 dB/Vrms and a 3.5 mm single-ended plug, the LAN II has a new diaphragm material, slightly lower impedance and a balanced stock cable. The high-purity oxygen-free copper cable comes with a 3.5 mm single-ended adapter. Also in the box are a storage case, S, M and L ear tips, an anime-girl card, a manual, a certificate and a service card.
Pairing
A source with a 4.4 mm balanced headphone output is the direct match. Single-ended 3.5 mm outputs need the supplied adapter. Any cable with 0.78 mm 2-pin connectors fits the sockets.
Alternatives
The Moondrop LAN is the first-generation model with a 10 mm beryllium-plated dome driver, a MIM steel shell and a 3.5 mm plug.