The 956 MK2 is a stereo power amplifier from Burmester of Berlin and a member of the Classic Line. It extends the amplifier family of the 909, and its technical design follows the same principles as the larger models. The 956 has been in production since 1996, earlier units can be upgraded to MK2 status, and the current version is priced at about USD 22,000. Silver is the standard finish, and Black is also offered.
Key specs that matter
Output power is 240 W into 4 ohms and 115 W into 8 ohms per channel in stereo. Bridged to mono, output is 500 W into 4 ohms and 348 W into 8 ohms. All four figures are rated at 230 V, 1 kHz and 1% THD+N. There is one balanced XLR input, plus a 10 V DC remote trigger input on a 5.5/2.5 mm barrel connector. Dimensions are 482 x 185 x 482 mm (W x H x D), and weight is approx. 30 kg.
Engineering and use context
Burmester specifies a high damping factor together with high current capability and a short rise time, without publishing figures. Its circuit layout is fully symmetrical, and the signal path is DC-coupled with no capacitors in it, as in the 909 and 911. Its amplifier stages operate in the class A range, and the input stages use Burmester's X-Amp technology.
High-purity copper conductors with a diameter of 10 mm carry the supply to the output stages and the signal to the speaker terminals. The case carries Burmester's own heat sinks in the house design. Protection circuits sit outside the signal path and monitor temperature, DC offset and peak current.
Every 956 MK2 is handmade in Berlin. According to Burmester, each unit goes through up to 300 measurements before and after a one-week stress test. Test protocols are archived for every device, so the original condition can be restored at any time, and the same records serve as the reference for later modifications under the long-term upgrade concept.
Pairing
A preamplifier with a balanced XLR output is required. The matching preamplifier is the Burmester 035 from the same line. Burmester states that the amplifier drives low-impedance and complex loudspeaker loads. The 10 V DC input allows it to be switched on remotely from a Burmester preamplifier.
Alternatives
The Burmester 909 MK5 is the larger stereo power amplifier of the brand.