Hifiverse

Endstufen Stereo - Burmester 036

Beschreibung, Bilder, technische Daten und Spezifikationen

Burmester 036
Bildquelle - (c) Burmester

The 036 is a stereo power amplifier from Burmester Audiosysteme of Berlin and the smallest power amplifier in the company's range. It belongs to the Classic Line and has the silver-anodised aluminium cooling fins typical of Burmester in a compact chassis. It is assembled by hand at the Berlin factory.

Key specs that matter

Output power is 2 x 100 W into 8 ohms, 2 x 170 W into 4 ohms and 2 x 280 W into 2 ohms. Frequency response is 3 Hz - 150 kHz. The power supply has 88,000 µF of filter capacitance and a 450 VA toroidal transformer, with a further 12,000 µF per channel of local filtering close to the output stages. There is one balanced XLR input, plus a remote control input and output. The AC mains switch is on the rear panel, and a front-panel POWER button switches between operation and standby. Power consumption is 400 W maximum, 60 W at idle and 4 W in standby. Dimensions are 480 x 106 x 481 mm (W x H x D), and weight is 19 kg.

Engineering and use context

Its circuit is symmetrical and entirely DC-coupled. Gain is 31 dB at gain switch position 0, and the internal switch, to be set only by a qualified technician, lowers it to 21 dB at position -6.

Protective circuits operate outside the signal path. At switch-on they run a check before the speaker outputs are enabled, and in operation they monitor temperature, DC offset and the current through the power transistors. An excess DC offset or current switches off the speaker relays, which re-engage automatically once the value is back within limits. Overheating switches off the output relays and puts the amplifier into standby until the temperature has fallen.

With adapters the 036 can be bridged to mono, and it supports bi-amping and Burmester's X-Amp concept.

Pairing

A preamplifier with a balanced XLR output is required. The matching Burmester preamplifier is the 035.

Alternatives

The 956 MK2 is another stereo power amplifier in Burmester's Classic Line.

Spezifikationen

  • Modellbezeichnung

    036

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    1

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    480 × 101 × 482

  • Gewicht (kg)

    19

  • Offizieller Link

Weitere Komponenten