The 216 is a dual-channel power amplifier in the Burmester Top Line, made in Berlin. It succeeds the 911 MK3, and like the 218 its design is derived from the 159 mono power amplifier. Launch prices were GBP 23,800 in the UK and USD 35,000 in the US.
Key specs that matter
Output power in stereo (IEC 62368-1) is 100 W into 8 ohms, 165 W into 4 ohms and 245 W into 2 ohms. Its balanced XLR input serves stereo or, with an adapter, mono bridge operation, and an unbalanced source connects via an adapter. A DC input and output for remote on/off (10 V DC switch-on voltage), a BurLink interface and solid screw speaker terminals are on the rear panel. Mains versions are the 216-240 for 230 - 240 V, the 216-120 for 110 - 120 V and the 216-100 for 100 V, all 50/60 Hz. Standby consumption is 0.46 W (230 V). Dimensions are 496 x 191 x 479 mm (W x H x D), and weight is 35 kg.
Engineering and use context
Burmester describes a completely symmetrical design. Input stages use Burmester X-Amp technology and operate in Class A, and the signal path is completely DC-coupled, without capacitors in the signal path. Protection circuits are placed outside the signal path. According to Burmester, the generously dimensioned power supply allows high current delivery, the damping factor stays high over the entire frequency range, even at high frequencies, and the amplifier is stable at all loads. Its lid is screwless, with no additional decorative elements.
A dedicated mono configuration is also offered. In it the output of both stereo stages goes to a single speaker load, the rear panel has one XLR input and two pairs of speaker terminals for bi-wiring, and each unit has its own power supply and isolated ground path. Existing 216 stereo units can be retrofitted, and the 216 Mono is sold individually or as a matched pair.
Components are selected to Burmester's tolerances, and every assembly is 100% inspected before installation. Each finished unit then goes through several days of test runs, further quality controls and a final listening test. Remote control is optional, and integration into a smart home system is possible.
Pairing
A preamplifier with balanced XLR outputs is the direct match. Burmester components can switch the 216 on and off remotely. Two 216 Mono units form a mono pair, one per channel.
Alternatives
The 218 is the larger Burmester stereo power amplifier, rated at 165 W into 8 ohms.