Integrated amplifiers — Canor Audio AI 2.10
Description, images, technical data and specifications
Canor Audio AI 2.10
Image source — © Canor Audio
What is it?
Ask AI to scan specialized sites and forums, evaluate the impressions of using the product, its advantages and disadvantages and get a summary.
Specifications
Model name
AI 2.10
Type
Integrated Amplifier
Analog inputs (balanced)
2
Analog inputs (single-ended)
4
Input sensitivity (mV)
400
Input impedance (balanced) (Ω)
30 000
Input impedance (single-ended) (Ω)
30 000
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
D/A conversion
N/A
Phono MM/MC current-sensing input impedance (Ω)
N/A
Output power (8Ω) (W)
2 x 100
Output power (4Ω) (W)
2 x 150
Gain (dBu)
N/A
Frequency response low +/- 3dB (Hz)
20
Frequency response high +/- 3dB (Hz)
20 000
Signal to Noise Ratio (dB)
95
Total Harmonic Distortion + Noise (%)
< 0,02
Damping factor
N/A
Dimensions (mm)
435 x 120 x 405
Weight (kg)
15
Official link
More components
Integrated amplifiers
Canor Audio AI 1.10
KT88 tube integrated amplifier in pure class A with operational switching of output stage modes (triode – ultralinear). The offset of the output stage is automatic. There is a possibility of bridging to implement the monoblock mode without an additional pre-amplifier. The volume is controlled using resistive attenuators with relay switching (separate for each channel). In the monoblock mode, the volume controls are synchronized according to the Master-Slave principle.
Integrated amplifiers
Canor Audio AI 1.20
A transistor integrated amplifier in pure class A with an output power of 50 Watts with the possibility of bridging to implement the monoblock mode of 100 watts each without an additional pre-amplifier. The volume is controlled using resistive attenuators with relay switching (separate for each channel). In the monoblock mode, the volume controls are synchronized according to the Master-Slave principle.
Integrated amplifiers
Canor Audio VIRTUS I2
An integrated tube amplifier with an innovative pure class A circuit with automatic current offset of the output stage, which is implemented on KT88 lamps with the ability to quickly switch the "triode-ultralinear" modes. A pair of amplifiers can be used in a bridge connection as monoblocks with double the power.
Integrated amplifiers
Canor Audio Virtus A3
The Canor Virtus A3 hybrid integrated amplifier provides an output power of 100 watts per channel when operating on a load with a nominal resistance of 8 ohms and 150 watts for a load of 4 ohms. The power amplifier uses differential feedback, which reads the audio output at both the positive and negative speaker terminals to ensure maximum linearity.
