Напольная акустика — SV Audio Astrid

The Astrid is a passive tower loudspeaker with a two-way layout, made by SV-Audio, the Danish maker that designs and builds its speakers in Denmark. The model was unveiled at High End Vienna 2026, held from 4 to 7 June at the Austria Centre Vienna, and the company had not announced a price at that debut. The current catalogue also includes the Frida, Gro and Fenja models.

Key specs that matter

SV-Audio describes the Astrid as a true two-way line source. Four stacked 5-inch mid-woofers with cones of woven self-reinforced polypropylene work on the front with a 1.5-inch (38 mm) silk dome ring radiator tweeter driven by a neodymium motor. Quoted frequency response runs from 32 Hz to 20 kHz within 3 dB, sensitivity is 90 dB and nominal impedance is 6 ohm. The maker suggests amplifiers between 25 and 250 W. Each cabinet measures 30 x 106 x 60 cm and weighs 37 kg.

Engineering and use context

Inside, a dual-chamber construction separates the drivers into individual bass chambers, and the bass reflex enclosure vents through ports on the rear panel. SV-Audio says the porting has been carefully tuned and the drivers are time aligned. The crossover uses a low crossover point with low-resistance components picked after listening tests and measurements, while pure copper is used for the internal wiring, ending at SV-Audio-branded terminals. A solid aluminium front baffle carries a machined company logo and a radiating pattern cut into the metal. SV-Audio suggests it for spaces as large as 80 m2 and asks for at least 80 cm between each speaker and the rear wall, which matters because the ports vent backwards. Finishes start with satin Pure Black, paired with a front in Bentley Copper or in Matte Black. High gloss choices are Black Pearl with Bentley Copper or Matte Black, Creme White with Anthracite Gray, Reference Pearl Gray with Matte Black and Deep Pearl Blue with Matte Black, and custom car paint colours are available to order.

Pairing

The nominal impedance presents a gentler load than that of the smaller Gro, so both modest valve amplifiers near the lower end of the suggested range and larger transistor designs can be considered. Solid-state integrated amplifiers of around 100 W per channel sit comfortably inside the stated window, and a low-output tube design can still drive it to useful levels in a mid-sized space thanks to the sensitivity.

Alternatives

The SV-Audio Gro is a smaller two-way floor-standing model from this Danish company, built with two 5-inch mid-woofers instead of four.