Наушники — Moondrop STELLARIS

The STELLARIS is a Moondrop wired in-ear design built around a single 14.5 mm planar magnetic driver and tuned to the brand's VDSF target response. Listed prices have ranged from USD 109.99 to USD 129.99. Its metal shells carry an iridescent finish that reflects different colours depending on angle and light, and the faceplates are decorated with hand-painted golden motifs of stars, a sun, a comet and a moon.

Key specs that matter

Moondrop rates impedance at 36 ohm plus or minus 15 percent at 1 kHz and sensitivity at 117 dB per Vrms at 1 kHz. The quoted frequency response spans 10 Hz to 50 kHz, and the effective range is 20 Hz to 20 kHz within 3 dB on an IEC 60318-4 coupler. The shells have recessed 0.78 mm two-pin sockets. The stock cable is 1.2 m of silver-plated OFC wire under clear insulation, ending in a 3.5 mm single-ended plug with an L-shaped housing, and PVC heat-shrink ear guides help it sit over the ear. Two sets of tips come in the box - T41 MIS-Tips and U.C. silicone tips, each in S, M and L - along with a leather case with a magnetic lid.

Engineering and use context

The planar diaphragm is 1 micron thick and carries a 2 micron etched conductor, and it is stretched on its bracket at uniform tension. Around it sits a fully symmetrical magnetic circuit of 7+7 N52H magnets, precisely arrayed during mould assembly, which Moondrop says lowers harmonic distortion and raises the efficiency of the magnetic circuit. The 7+7 count places seven magnets on each side of the diaphragm. To control the resonant frequency of the whole system, Moondrop attached an independent built-in acoustic cavity to the driver. The long sound nozzle ends in black tuning foam, and pressure relief openings near the corners of the shell vent air behind the driver so the diaphragm is not loaded by trapped pressure when the tip seals the canal.

Pairing

Being an efficient planar design, the STELLARIS can be driven to usual volumes by a USB-C dongle or a pocket player alone, and the stock tips and short lead are sized for portable use. The cable is single-ended only, so connecting a balanced output requires a separate two-pin cable with the matching plug. Both included tip types are sized for the long nozzle, and the choice between them changes insertion depth and seal.

Alternatives

The Moondrop Blessing 3 is a 2DD + 4BA hybrid in-ear model rated at 14.8 ohm and 120 dB per Vrms.