EgglestonWorks specifies a sensitivity of 87 dB (2.83 V, 1 m), a nominal impedance of 8 ohms (with a minimum of 5.4 ohms), and a frequency range of 18 Hz to 24 kHz (-3 dB). A one-inch fabric dome tweeter is flanked by two 6-inch carbon-fiber midrange drivers featuring 3-inch voice coils. Two 6-inch mid-bass drivers operate in an isobaric configuration, while four 12" woofers are arranged in two push-push pairs, a setup that partially cancels out reactive forces acting on the cabinet. The 39 - 45 mm thick walls are internally reinforced with aluminum bracing, resulting in an effective thickness of up to 76 mm. The modest sensitivity and an impedance dip just above 5 ohms call for an amplifier with substantial current reserves rather than a low-power tube design. Two pairs of rhodium-plated binding posts on each cabinet allow the bass section and the upper-frequency drivers to be connected via separate cables or driven by separate amplifier channels.
How it sounds
With six bass and mid-bass drivers per side moving air in unison, the low-end response is weighty, even in a large room. When playing vinyl, the speakers created a wide, deep soundstage with precisely positioned performers—a feat aided by the rigid, heavily braced cabinet.
In this column, the original design principles are applied, which are put above all else in the company. The company's design philosophy has always been distinguished by two main areas that are most important for any acoustics: precision and musicality.