According to Stenheim, the passive Ultime Three delivers 96 dB sensitivity (at 2.83 V/1 m), has a nominal impedance of 4 ohms, handles 1,000 W RMS, and offers a frequency response of 25 Hz to 100 kHz. Low-frequency reproduction is handled by four 32cm woofers—two of which are rear-firing—while a pair of 16.5cm neodymium midrange drivers flank a neodymium tweeter in a D'Appolito configuration, and a ribbon driver handles the high frequencies. The crossover is housed in two separate external enclosures, and jumpers allow the owner to adjust the levels of the midrange and high-frequency sections. The internal volume is divided into six sealed (non-ported) chambers, reinforced with bracing and damped using three-layer liners. Thanks to this efficiency, realistic volume levels are achievable with modest power, although the 4-ohm load and four large woofers per side still demand a solid-state amplifier with a robust power supply and ample current headroom. A motorized mechanism for adjusting the tilt angle of the MTM section is available as an option.
How it sounds
High sensitivity allows the speakers to play loudly without placing a heavy load on the power amplifier, letting dynamic peaks unfold without compression; meanwhile, the sealed chambers suppress cabinet resonances and prevent the fine details of various instruments from blurring together. The rear-firing woofers add a sense of scale and weight that fills a large room.
by Stenheim
The Reference Ultime Passive external woofer filter is identical in configuration to the active model. The acoustic design made of aluminum with integrated six separate closed chambers for radiators has not changed — the engineers have done everything possible to "speak" only the speakers, and the case is silent.