The KV9 is the entry point to the tonearm range of J.Sikora, the Polish firm set up in Lublin in 2007 by Janusz Sikora, who designed this arm himself. Like the other KV arms, it combines an oil-damped unipivot bearing with a conical Kevlar armtube, here in the short version and at a lower price. In autumn 2024 it cost EUR 4,200 without the VTA tower, and European price lists run up to about EUR 5,745 depending on finish and the VTA option.
Key specs that matter
Effective length is 228.6 mm, with a mounting distance of 212 mm. J.Sikora quotes an effective mass of 11.2 g and an arm mass of 160 g. Bearing type is unipivot with oil damping. Both VTA and azimuth are adjustable. Besides Kevlar, the parts list names aluminium, bronze, brass and stainless steel. Wiring is 24K gold-plated 6N OCC copper. Standard colours are natural yellow and lacquered black matte.
Engineering and use context
Janusz Sikora set the design targets for his KV arms as a unipivot bearing, a Kevlar tube, the highest stiffness at the lowest possible weight, oil damping and a mix of metals and alloys with different physical properties. He chose Kevlar because it is light, stiff and energy absorbing. Kevlar is supplied as a fabric, so every conical tube is made in-house rather than bought as ready tubing.
Production of the tube uses dies for rolling and cutting the aramid fabric. Because the fabric frays during cutting, J.Sikora developed special machining procedures and chose the resins, their temperature and the method of application. Damping, anti-skating, azimuth and VTA on the KV arms can all be adjusted while a record plays.
Pairing
An armboard cut for this mounting distance is required. Medium-compliance cartridges match its effective mass.
Alternatives
The J.Sikora KV9 MAX shares the same geometry but uses a zirconium oxide bearing, bronze metalwork and a lower effective mass.