Hifiverse

Tonearms — European Audio Team (EAT) F-NOTE

Description, images, technical data and specifications

European Audio Team (EAT) F-NOTE
Image source - (c) European Audio Team (EAT)

The F-Note is a gimbal-bearing tonearm from European Audio Team (E.A.T.), the turntable brand of Jozefina Lichtenegger. E.A.T. offers it as a separate arm and pre-mounted on its own decks, and on the F-Dur it comes in black or polished aluminium. In the UK the F-Dur with the F-Note is listed at GBP 7,899. Variants on the E.A.T. site include the Satin Black Edition, an S-Shape version, a Wood version and an S-Shape arm with a detachable headshell.

Key specs that matter

Effective length is 304.8 mm and effective mass is 21.4 g. Pivot to spindle distance is 291.6 mm, overhang 13.2 mm and offset angle 18°. Null points are at 125 mm and 251.7 mm. Bearings are of the gimbal type, and the finish is hand-polished aluminium.

Engineering and use context

E.A.T. describes a cardanic construction with four ultra low friction pinpoint bearings, an eccentric gimbal bearing system with hardened and polished bearing cones. In the top version the bearings run on a super hard diamond mirror. A massive base isolates the arm from vibrations produced by the turntable itself.

VTA, VTF and azimuth are adjustable without tools. VTA adjustment has two stages - the arm pillar is first moved up or down in the base, and a fine adjustment is then unlocked with a separate locking screw. Azimuth is set at the factory and can be changed by rotating the arm tube after loosening a small set screw. For final checks a laser diode shines through two holes in the aluminium headshell, the one in the finger lift for azimuth and the one in the middle for VTA. The laser assembly is held by magnetic force and runs on three LR41 cells.

Its counterweight is damped, and fine tracking force is set by rotating the counterweight body on a fine thread. Anti-skating is pre-adjusted at the factory and uses a weight on a thread with three grooves, for 10 - 14 mN, 15 - 19 mN and 20 mN and above. A 5-pin output is located at the rear of the arm. On the Forte and Forte S the F-Note mounts with its own flange in place of the standard E.A.T. flange. A tonearm cable and a two-point alignment protractor are included.

Pairing

The supplied counterweight accepts cartridges weighing 7 - 22 g. A phono stage matching the chosen cartridge is required. E.A.T. names its Jo N°5 moving coil cartridge with a nude fine line stylus as the partner for this arm.

Alternatives

The EAT C-Note is the other tonearm of the range, a unipivot and cardan hybrid with a carbon tube and an effective mass of 19.2 g.

Specifications